PROF.DR. NURSEL DİLSİZ

 

 

PUBLICATIONS

 

THESİS

1. N. Dilsiz, “Plasma Modified Carbon Fiber-Epoxy Composite Systems”, Advisor: Prof. G. Akovalı (METU) and  co-advisor: Prof. W. Weisweiler (Institute of Chemical Technology, Karlsruhe Univ. Germany),  Ph.D., 1994.

 

2. N.Dilsiz, “Effect of Electrode Type, Reactor Configuration and Substrate Temperature on the Plasma    Polymers of Acrylonitrile and Hexamethyldisiloxane” Advisor: Prof. G. Akovalı (METU),   M.s.,  1986.

 

REFEREED JOURNALS

 

1.      1. Nursel Dilsiz, Hande Yavuz, Süleyman Çörekçi, Mehmet Çakmak; Plasma Surface Functionalization of Biaxially Oriented Polypropylene Films with Trimethyl Borate”, Advances in Materials Physics and Chemistry, 1, 50-55, (2011)

2.Demirel Gokcen Birlik; Dilsiz Nursel; Ergun Mehmet Ali; et al. “Photocontrollable DNA hybridization on reversibly photoresponsive surfaces” , Journal of Materials Chemistry,   Volume: 21   Issue: 28   Pages: 10415-10420, (2011)

3..Demirel Gokcen Birlik; Dilsiz Nursel; Cakmak Mehmet; et al. Molecular design of photoswitchable surfaces with controllable wettability, Journal of Materials Chemistry,   Volume: 21   Issue: 9   Pages: 3189-3196, (2011)

4. Miyaser Demirel, Vecihi Pamuk, Nursel Dilsiz, “Investigation of flame retardancy and physical-mechanical properties of zinc borate/boric acid polyester composites”, Journal of Applied Polymer Science Volume 115, Issue 5 , Pages: 2550 – 2555 (2010)

5.Yavuz, H.; Rzaev, Z.; Dilsiz, N. “Characterization of Flame Retardant Plasma Polymer Deposited BOPP Film”   Plastics, Rubber and Composites: Macromolecular Engineering, Vol 37, No:5, 268-275, 2008.

6. Nursel Dilsiz  and Alper Ünver, “Characterization Studies on Aging Properties of Acetylferrocene Containing HTPB Based Elastomers” Journal of Aplied Polymer Science, Vol.101, 2538-2545  (2006).

7. Tuncer Caykara, Melek Bulut, Nursel Dilsiz, Yüksel Akyüz, “Macroporous Poly(acrylamide) Hydrogels: Swelling and Shrinking Behaviors” Journal of Macromolecular Science  Part A: Pure and Applied Chemistry,  43, 889-897 ( 2006).

8. Alper Ünver, Nursel Dilsiz, Mürüvet Volkan, Güneri Akovalı “Investigation of Acetylferrocene Migration from HTPB-Based Elastomers by Means of UV-VIS and AAS Techniques” Journal of Applied Polymer Science, Vol. 96, 1654-1661  (2005).

9. N. Dilsiz  and G. Akovalı, “Study of Sol-Gel Processing for Fabrication of Low Density Alumina Microspheres”,  Materials Science and Engineering A,  Vol.332, No.1-2, 91-96 (2002).

10. N. Dilsiz, “Plasma Surface Modification of Carbon Fibers: A Review”, Journal of Adhesion Science and Technology,  Vol.14, No.7, 975-987 (2000).

11.  N. Dilsiz, and J.P. Wightman, “Effect of Acid-Base Properties of Unsized and Sized Carbon Fibers on Fiber/Epoxy Matrix Adhesion”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 164, 325-336 (2000).

12.  N. Dilsiz, and J.P. Wightman, “Surface Analysis of  Unsized and Sized Carbon Fibers”, Carbon, 37, 1105-1114 (1999).

13. E. Sancaktar  and N. Dilsiz, “Thickness Dependent Conduction Behavior of Various Particles for Conductive Adhesive Applications”, Journal of Adhesion Science and Technology, Vol.13, No.7, 763-771 (1999).

14. E. Sancaktar  and N. Dilsiz, “Pressure Dependent Conduction Behavior of Various Particles for Conductive Adhesive Applications”, Journal of Adhesion Science and Technology,  Vol.13, No.6, 679-693 (1999). 

15. N. Dilsiz, R. E. Partch, E. Matijevic and E. Sancaktar “Silver Coating of Spindle and Filament Type Magnetic Particles for Conductive Adhesive Application” Journal of Adhesion Science and Technology, Vol.11, No.8, 1105-1118 (1997).

16. E. Sancaktar and N. Dilsiz “Anisotropic Alignment of Nickel Particles in Magnetic Field for Electronically Conductive Adhesives Applications”, Journal of Adhesion Science and Technology, Vol.11, No.2,  155-166 (1997).

17. G. Akovalı and N. Dilsiz, “Studies on the Modification of Interphase/Interfaces by Use of Plasma in Certain Polymer Composite Systems”, Polymer Engineering and Science, Vol.36, No.8,  1081-1086 (1996).

18. N. Dilsiz and G. Akovalı "Effects of Plasma Surface Modification on the Mechanical Properties of Carbon Fiber and Carbon Fiber/Epoxy Composites", Composite Interfaces, Vol.3, No. 5/6, 401- 410 (1996).

19. N. Dilsiz and G. Akovalı "Plasma Polymerization of Selected Organic Compounds", Polymer,  Vol.37, No.2,  333-342 (1996).

20. N. Dilsiz, E. Ebert, W. Weisweiler and G. Akovalı "Effect of Plasma Polymerization on Carbon Fibers used for Fiber/Epoxy Composites", Journal of Colloid and Interface Science, Vol.70, No.1, 241-248 (1995).

21. N. Dilsiz, N.K. Erinç, E. Bayramlı and G. Akovalı "Surface Energy and Mechanical Properties of Plasma Modified Carbon Fibers", Carbon, Vol.33, No.6,  853-858 (1995).

22. G. Akovalı and N. Dilsiz "Studies on the Effect of Electrode Type and Substrate Temperature on Plasma Polymerization of Two Model Compounds: Acrylonitrile and Hexamethyldisiloxane", Polymer Engineering and Science, Vol.30, No.8,  485-489 (1990).

PUBLICATIONS-CITATIONS 

Number of Citations in SCI (by November 2012) :  301

 

INTERNATIONAL CONFERENCE  PROCEEDINGS

 

1. N. Dilsiz,  Miyaser Demirel,  Hande Yavuz and Vecihi Pamuk “Investigation of flame retardency and physical–mechanical properties of zinc borate/boric acid  polyester composites” 5th Chemical Engineering Conference for Collobarative Research in Eastern Mediterranean Countries -EMCC5, 24-29 Mayıs 2008, Cetraro, İtalya.

 

2. N.Dilsiz, I.Bagci, H. Yavuz and A.Biçer “ Preparation and Characterization of Nano-Silica/Epoxy Nanocomposite” 3rd China-Europe Composite Symposium on Processing and Properties of Reinforced Polymers,  June 11-15, 2007 Budapeste, Hungary.

 

3. H.Yavuz, Z.M.O.Rzaev and N. Dilsiz “ Characterization of Flame Retardant Plasma Polymer Deposited Films” 3rd China-Europe Composite Symposium on Processing and Properties of Reinforced Polymers,  June 11-15, 2007 Budapeste, Hungary.

 

4. N. Dilsiz and G. Akovalı “Surface Characterization  of Coated Carbon Fibers” The Polymer Processing Society 2001 Regional Meeting, October 22-24, 2001 Antalya, Türkiye.

 

5. N. Dilsiz, N.K.Erinç, E. Bayramli and G. Akovali “Characterization of Plasma Modified Carbon Fiber by Surface Energy Measurement and its Behavior on Mechanical Properties” Property Tailoring of Thermoplastics Based Blends and Composites Proceedings, 14th Bratislava International Conference on Modified Polymers, October 1-4, 2000, Bratsislava, Slovak.

 

6. E. Sancaktar  and N. Dilsiz “ Conduction Behavior of Filled Polymer Films” IMAPS-Europe Prague 2000, Symposium Proceedings (IMAPS) Czech and  Slovak Chapter), P. Mach, J. Urbanex (eds.) pp. 140-144 (2000). European Microelectronics Packing and Interconnection Symposium, Jun 18-20, 2000, Prague, Czech Republic.

 

7. N. Dilsiz and J.P. Wightman “Surface Characterization of sized Carbon Fibers Used in Fiber/Polymer Matrix” Society of Vacuum Coaters 43rd  Annual Technical Conference Proceedings, pp. 316-319,  April 15-20, 2000,  Denver, Colorado, ABD.

 

8. N. Dilsiz and G. Akovalı “Plasma Surface Modification of Carbon Fibers to Improve Adhesion Between Carbon Fiber/Epoxy Composites”,  2nd International Symposium on Polymer Surface Modification: Relevance to Adhesion, Vol. 2, 215-224, (2000),  May 24-26, 1999, Newark, ABD.

 

9. E. Sancaktar  and N. Dilsiz, “Thickness Dependent Conduction Behavior of Various Particles for Conductive Adhesive Applications” Proceedings of 3rd International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing (IEEE, Piscataway,NJ), J.H. Constable (Ed.) pp. 90-95, Eylül 27-30, 1998, NJ, ABD.

 

10. E. Sancaktar  and N. Dilsiz, “Pressure Dependent Conduction Behavior of Various Particles for Conductive Adhesive Applications” Proceedings of 3rd International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing, (IEEE, Piscataway,NJ), J.H. Constable (Ed.) pp. 334-344, September 27-30, 1998, NJ, ABD.

 

11. J. Wightman and N. Dilsiz, “Effect of Acid-Base Properties of Unsized and Sized Carbon Fibers on Fiber/Epoxy Matrix  Adhesion”, The Adhesion Society’s 21th Annual Meeting, February 23-26, 1998, Savannah, Georgia, ABD.

 

12. J.P. Wightman, N. Dilsiz, H. Oyama, R. Davis, J. McGrath and J. Riffle “Experimental Characterization of Unsized and Sized Carbon Fibers and of Carbon Fiber/Polymer Matrix Interface”, American Chemical Society 49th Southeastern Regional Meeting, SERMACS - 97, October 19-22 1997, Blacksburg, Virginia, ABD.

 

13. N. Dilsiz and J.P. Wightman, “Effect of Acid-Base Properties of Sized Carbon Fibers on Fiber/Epoxy Matrix”, Proceedings of 3rd International Conference on Progress in Durability Analysis of Composite Systems, pp. 309-314 (1998), K.L. Reifsnider, D. A. Dillard and A.H. Cardon (Eds.), September  14-17 1997, Blacksburg, Virginia, ABD.

 

14. J.P. Wightman and N. Dilsiz, “Surface Analysis of Carbon Fibers Used in Fiber/Matrix Composites”, 75th Annual Meeting of the Virginia Academy of Science, May 20-23, 1997, Blacksburg, Virginia, ABD.

 

15. N. Dilsiz and J.P. Wightman “Wettability Studies of the Sized Carbon Fibers”, PMIL Industrial Affiliates Meeting, May 18-19, 1997, Blacksburg, Virginia, ABD.

 

17. J.P. Wightman, R.M. Davis, N. Broyles, N. Dilsiz, H. Oyama, and J.S. Riffle, “Surface Chemical Studies of Sized Carbon Fiber and Sizing/Matrix Interface”, NSF Science and Technology Center for High Performance Polymeric Adhesives and Composites  Meeting, April 23, 1997, Blacksburg, Virginia, ABD.

 

18. N.Dilsiz and E. Sancaktar, “Anisotropic Alignment of Nickel Particles in Magnetic Field for Electronically Conductive Adhesives Applications”, The Adhesion Society`s 20th Annual “Anniversary” Meeting, pp 651-652, L.T Drzal and H.P. Schreiber (Eds.),  February 23-26, 1997, Hilton Head Island, South Carolina, ABD.

 

19. J.P. Wightman, N. Dilsiz  and H.T.Oyama, “Experimental Studies of the Carbon Fiber/ Sizing and Sizing/Polymer matrix Interfaces“,5th Center for Adhesive and Sealant Science / Center for Composite Materials and Structures Technical Conferences, Ekim  13-15, 1996, Blacksburg, Virginia.

 

20. N. Dilsiz, Y. Wei, E. Matijevic, R. Partch and E. Sancaktar “Preparation of Magnetic Particles for Anisotropic Electric Conduction in Conductive Adhesive” CAMP Annual Meeting, May 8-10, 1995, Potsdam, New York.

 

21. G.Akovalı,   A. Akman and N.Dilsiz, “Studies on Modification of Interphase/Interfaces  by use of Plasma in Certain Polymeric Composite Sytems”, Third Int'l Conf.on Polymer Characterization, January, 1995, Denton.

 

22. N.Dilsiz, G.Akovalı and W.Weisweiler, “Effect of Plasma Polymerization on Carbon Fibers for Use in Epoxy Composites”,  Makro Akron 94, 35 th IUPAC,  1994, Akron, Ohio.

 

23. N. Dilsiz and G. Akovalı "Optimization Studies to enhance the Interaction between Carbon Fiber/Epoxy Composites by using Plasma Technique" in 2nd Türkiye-Azerbeycan Polymer Symposium, 14-16 September 1992, Ankara, Türkiye.

 

 

NATIONAL CONFERENCE  PROCEEDINGS

 

 

1. Metin Gürü, Emin Akın, Yüksel Akyüz, Emre Özçelik, Nursel Dilsiz  “ Mermer Tozlarının ve Hurda Plastiklerin Polimer Kompozit Malzeme Üretiminde Değerlendirilmesi” GAP V. Mühendislik Kongresi 26-28 Nisan 2006, Şanlıurfa.

 

2. Alper Ünver, Nursel Dilsiz, Mürüvet Volkan, Güneri Akovalı,  "Characterization and Minimization of Acetylferrocene Migration from HTPB-Based Elastomers,  XIX. Ulusal Kimya Kongresi 30 Eylül- 4 Ekim 2005,  Kuşadası.

 

3. N.Dilsiz ve G.Akovalı , “Plasma Modified Carbon Fiber-Epoxy Composite Systems”, 10th. Chemistry and Chemical Engineering Symposium, 1994,  Bursa, Türkiye.

 

4. N. Dilsiz and G. Akovalı "Effect of Electrode Type, Reactor Configuration and Substrate Temperature on the Plasma Polymers of Acrylonitrile and Hexamethyldisiloxane",  VII. Kimya ve Kimya Mühendisliği Sempozyumu, April 1991, Gazimağusa, KKTC.