A. Uluslar arası dergilerde yayınlanan makaleler:

1- Gürü, M., A. Kapulluoğlu, Optimization of Electricity Production from Geothermal Sources by Binary System, Energy Sources, Part A, baskıda

2- Keskin A, M.Gürü, Effects of ethanol and propanol additions into unleaded gasoline on exhaust and noise emissions of a spark ignition engine, Energy Sources, Part A, baskıda

3- Çakanyıldırım Ç, M.Gürü, Production of NaBH4 from its elements by mechano-chemical reaction and usage in hydrogen recycle, Energy Sources, Part A, baskıda.

4- Çakanyıldırım Ç, M.Gürü, Synthesis of Sodium Borohydride from Anhydrous Borax by means of Solid Phase Reaction, Renewable Energy, baskıda

5- Kaya, S., Gürü, M, Ar, İ., Synthesis of magnesium borohydride from its elements and usage in hydrogen recycle, Energy Sources, Part A, baskıda.

6- Keskin A, M.Gürü, D. Altıparmak, Investigation of performance and emissions characteristics of tall oil biodiesel with Co based additive, Energy Sources Part A, baskıda.

7- Gürü M.,Can Ö., Koca A, Çınar C., Şahin F., Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a Diesel engine, Renewable Energy, 35(3), 637-643, 2010.

8- Çakanyıldırım Ç, M.Gürü, Processing of NaBH4 from NaBO2 with MgH2 by ball milling and usage as hydrogen carrier, Renewable Energy, baskıda.

9- Çakanyıldırım Ç, M.Gürü, Supported CoCl2 catalyst for NaBH4 dehydrogenation, Renewable Energy, 35: 839-844, 2010.

10- İçen, H. & Gürü, M., Extraction of caffeine from tea stalk and fiber wastes using supercritical carbon dioxide, J. of Supercritical Fluids, 50(3), 225-228, 2009.

11- Metin Gürü, Meltem Şahin, Süleyman Tekeli, Hanifi Tokgöz, Production of Polymer Matrix Composite Particleboard from Pistachio Shells and Improvement of Its Fire Resistance by Fly Ash, High Temperature Materials and Processes, 2009.

12- Gürü, M., Y. Aruntaş, İ. Bilici, N.Tüzün, “Processing of urea-formaldehyde based particleboard from hazelnut shell and improvement of its fire and water resistance" J of Fire and Materials, 33: 413-419, 2009.

13- Çakanyıldırım Ç, M.Gürü, Production of NaBH4 and Hydrogen Release with Catalyst, Renewable Energy, 34(11), 2362-2365, 2009.

14- Çubuk, M., Gürü, M., Çubuk, M.K., “Improvement of bitumen performance with epoxy resin”, Fuel, 88, 1324-1328, 2009.

15-. M. Gürü, B.D. Artukoğlu, A. Keskin, A. Koca, “Biodiesel production from waste animal fat and improvement of its characteristics by synthesized nickel and magnesium additive" Energy Conversion and Management, 50(3),498-502, 2009.

16- Çaynak S, Gürü M; Biçer, A, Keskin A, Içingür Y. “Biodiesel production from pomace oil and improvement of its properties with synthetic manganese additive”, Fuel, 88(3), 532-536, 2009.

17- Demirel G.B., T. Çaykara, M. Demiray, M. Gürü, “Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]methacrylamide-co-acrylamide) Hydrogels”, Journal of Macromolecular Science, Part A:Pure and Applied Chemistry, 46,1-7, 2009.

18- Engin B., M. Gürü and A. Alıcılar “Removal of Ferrous Iron in Synthetic Waters by Catalytic Air Oxidation”, Asian J. Chem., 21(3), 2067-2071, 2009.

19- M. Gürü, S. Tekeli, Ç. Çakanyıldırım, C. Cabbar, Processing of Cer-Met Composite Material from Zn and B2O3, High Temperature Materials and Processes, 27(4), 243-248, 2008.

20- Keskin A., M. Gürü, D. Altıparmak, “Influence of Tall Oil Biodiesel with Mg and Mo Based Fuel Additives on Diesel Engine Performance and Emission”, Bioresource Technology, 99(14), 6434-6438, 2008.

21- Çetin Çakanyıldırım, Metin Gürü, “Processing of LiBH4 from its elements by ball milling method” Renewable Energy, 33(11), 2388-2392, 2008.

22- Metin Gürü, Duygu Venedik, Ayşe Murathan, “Removal of trivalent chromium from water using low cost natural diatomite”, Hazardous Material, 160(2-3), pp.318-323, 2008.

23- Tekeli, S., A.Kayış, M.Gürü, ‘Microstructural, Mechanical and Electrical Properties of Alumina Doped Cubic Zırconia (c-ZrO2)’, Journal of solid state electrochem. 12(7-8),791-797, 2008.

24- Çetin Çakanyıldırım, Metin Gürü, “Hydrogen cycle with sodium borohydride” Hydrogen Energy, 33(17), 4634-4639, 2008.

25- S.Tekeli and M.Guru,.”Microstructural Design and High Temperature Tensile Deformation Behaviour of 8 Mol% Yttria Stabilized Cubic Zirconia (8YCSZ) with SiO2 Additions", Ceramics International, 34(1),137-140, 2008.

26- Metin Gürü, A. Murathan, N. Tüzün, A. Asan, T. Kıyak, “Oxidative desulfurization of Çayırhan lignites by permanganate solution”, Energy Sources Part A, 30(16), 1508-1515, 2008.

27- Keskin A., M. Gürü, D. Altıparmak and K. Aydın, “Using of cotton oil biodiesel-diesel fuel blends as alternative diesel fuel”, Renewable Energy, 33(4), 553-557, 2008.

28- Metin Gürü, B. Volkan Sarıöz, Çetin Çakanyıldırım, “Oxidative desulfurization of Tufanbeyli coal by hydrogen peroxide solution”, Energy Sources Part A, 30(11), pp. 981-987, 2008.

29- Gürü, M., M. Atar, R. Yıldırım, Production of polymer matrix composite particleboard from walnut shell and improvement of its requirements, Material and Design, 29, 284-287, 2008.

30- Mehmet Emin Argun, Sukru Dursun, Mustafa Karatas, Metin Gürü, Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal, Bioresource Technology, 99(18), 8691-8699, 2008.

31- Özgecan Barlay Ergu, Metin Gürü, Canan Cabbar, Preparation and characterization of alumina-zirconia composite material with different acid ratios by the sol-gel method, Central European Journal of Chemistry, 6(3),482-487, 2008.

32- S.Tekeli, M.Gürü, O.E.Sağlam, Densification and grain-growth behavior of various amounts of SiO2 doped 8YSCZ/SiO2 composites, Materials and Manufacturing Processes, 22: 1-5, 2007.

33- Ali Keskin, Metin Gürü, Duran Altıparmak, “Biodiesel production from tall oil with synthesized Mn and Ni based additives on fuel consumption and emissions”, Fuel, Vol 86/7-8 pp 1139-1143, 2007.

34- Tekeli S, A. Güral, M. Gürü, “Influence of Tempering Temperature and Microstructure on Wear Properties of Low Alloy PM Steel with 1-2 % Ni Addition”, Materials Science Forum, Vols 534-536, 629-632, 2007.

35- Güral, A., S. Tekeli, D. Özyürek, M.Gürü, “Effect of Repeated Quenching Heat Treatment on Microstucture and Dry Sliding Wear Behavior of Low Carbon PM Steel”, Materials Science Forum, Vols 534-536, 673-676, 2007.

36- Murathan, A., A.S. Murathan, M. Gürü, M. Balbaşı, “Manufacturing low density boards from waste cardboards containing aluminium, Material and Design, 28(7), 2215-2217, 2007 .

37- Akyüz, Y., Biçer, A., Gürü, M., Synthesis and processing of Al sheathed MgB2 by powder in tube method and determination of superconducting and mechanical properties, Materials & Design, 28(9), 2500-2504, 2007.

38- Duran Altıparmak, Ali Keskin, Atilla Koca, Metin Gürü ,“Alternative fuel properties of tall oil fatty acid methyl esters-diesel fuel blends”, Bioresource Technology, Vol. 98, 241-246, 2007.

39- Nihal Tüzün, Metin Gürü, Yüksel Akyüz, “Comparison of the curing kinetic behavior for two epoxy resin systems containing epikote 828-epikure 3090 and duratek klm 606a -duratek klm 606b”, Polymer Composites, 28(6), 762-770, 2007.

40- Tuncer Çaykara, Şerife Şirin Alaslan, Metin Gürü, Hatice Bodugöz, Olgun Güven, Preparation and characterization of poly(isobutyl methacrylate) microbeads with surface grafted amidoxime groups, Radiation Physics and Chemistry, 76, 1569-1576, 2007.

41- Gürü, M., M. Korçak, S. Tekeli, A. Gürdal, “Processing of Zinc-Based MgAl2O4 composite and Effect of Fly Ash Addition”, J. Key Engineering Materials, Vols.336-338, 1203-1206, 2007.

42- Gürü, M., Y. Akyüz, S. Tekeli, “Synthesis of MgB2 from Anhydrous B2O3 by Ball Milling Method and Determination of Superconductivity Properties”, J. Key Engineering Materials, Vols.336-338, 723-725, 2007.

43- Gürü, M., S. Tekeli, E. Akın, “Manufacturing of Polymer Matrix Composite Material Using Marble Powder and Fly Ash”, J. Key Engineering Materials, Vols.336-338, 1353-1356, 2007.

44- Tekeli, S., M. Gürü, “Indentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte Material”, J. Key Engineering Materials, Vols.336-338, 2418-2421, 2007.

45- Gürü, M., “Oxidative desulfurization of Aşkale coal by nitric acid solution”, Energy Sources Part A, 29(5), 463-469, 2007.

46- Gürü, M., M. Çubuk, Ş.Dursun, A. Demirbaş, “Biodesulfurization of Çayırhan Lignites”, Energy Sources, Part A, 28:559-565, 2006.

47- Gürü M., S. Tekeli, İ. Bilici, “Manufacturing of urea - formaldehyde based composite particleboard from almond shell”, Material & Design, 27, 1148-1151, 2006.

48- Gürü, M., S. Benli, Y. Akyüz, A. Alıcılar, “An Investigation On Kinetics Of Oxalic Acid Synthesis", Cellulose Chemistry & Technology, 39, 1-2, 49-53, 2005.

49- Gürü, M., G. Özkan, A. Murathan, İ. Öksüz, “Effect Of Temperature And Gas Flow Rate on SO2 Sorption in a Reactor with Periodic Liquid Flow And Active Carbon”, Fresenius Environmental Bulletin, 14 (5), 400-405, 2005.

50-Tekeli, S. & M.Gürü, “The Factors Affecting Colloidal Processing Of 8YSCZ Ceramics”, Key Engineering Materials, Vols. 280-283, 729-734, 2005.

51- A.F. Qasrawi, T.S. Kayed, A. Mergen, M. Gürü, Synthesis and characterization of Mg2B2O5, Material Research Bulletin, 40, 583-589, 2005.

52- M. Bilen, A. Mergen, M. Gürü, A. Alıcılar, “Infiltration of Al Alloys into MgAl2O4 under Different Atmospheres”, Key Engineering Materials, June 5th, Vols 264-268, 1795-1798, 2004.

53- A. Mergen, T.S. Kayed, M. Bilen, A.F. Qasrawi, M. Gürü, “Production of Anorthite from Kaolinite and CaCO3 via Colemanite”, Key Engineering Materials, June 5th, Vols 264-268, 1475-1478, 2004.

54-Gürü, M., "Improvement of Adhesion of Bitumen-Aggregate Coatings by Additive", Cell. Chem. & Tech., 38 (1-2), 129-140, 2004.

55-Gürü, M., İçen, H., “Obtaining of caffeine from Turkish tea fiber and stalk wastes”, Bioresource Tech., 94(1), 17-19, 2004.

56-Alıcılar, A., M. Kömürcü and M. Gürü, "The removal of cyanides from water by catalytic air oxidation in a fixed bed reactor", Chemical Engineering and Processing, 41 (6): 525-529 JUL 2002.

57-Gürü, M., U. Karakaya, D. Altıparmak, A. Alıcılar, "Improvement of Diesel Fuel Properties by Using Additives", Energy Conversion and Management, 43(8), pp. 1021-1025, 2002.

58- Alıcılar, A., S. Karadavut and M. Gürü, "Air Oxidation of Aqueous Sulphide Solutions in Packed Columns", Fresenius Environmental Bulletin, 10 (7), pp. 620-623, 2001.

59- Gürü, M., V. Pamuk and A. Y. Bilgesü, "Production of Oxalic Acid from Sugar Beet Molasses by Mixed Nitric Acid and Sulphuric Acid", Cellulose Chem. Technol., 36, 1-2, 81-91 (2002).

60- Gürü, M., A. Y. Bilgesü and V. Pamuk, "Production of Oxalic Acid from Sugar Beet Molasses by Formed Nitrogen Oxides", Bioresource Tech., 77, pp. 81-86, 2001.

61-Birey, M., H. Aktaş, A. Alıcılar and M. Gürü, "ESR Spectroscopics Study of Radicals Formed from Methoxycarbonylcholine Picrate Hemihydrate", Radiation Effects and Defects in Solids, 140, 365-371, 1997.

62-Alıcılar, A., M. Doğan and M. Gürü, "Optimization of Double Stage Flash System", International Journal of Energy Research, 19, 169-179, 1995.

C. Ulusal dergilerde yayınlanan makaleler

1- Gürü, M., Z. Karel, "Atık Pillerin Çevresel Etkileri ve Giderilme Teknikleri“, Hacettepe Üniversitesi Çevre Bilimleri Dergisi, 8, 9-16, 2009.

2- Ali Keskin, Metin Gürü, Duran Altıparmak, "Tall yağı esaslı B90 biyodizel yakıtının dizel motorlarda alternatif yakıt olarak incelenmesi", Gazi Ü. Müh. Mim. Fak. Dergisi(EI),22(1), 57-63,.2007. 

3- Ali KESKİN, Metin GÜRÜ, Duran ALTIPARMAK, M. Akif KUNT, ”Tall Yağı Biyodizeli Üretimi ve B80 Oranının Dizel Yakıtı Olarak Kullanımı“, Politeknik, 10(4), 391-394, 2007.

4- Çetin Çakanyıldırım, Metin Gürü, “Hydrogen cycle with sodium borohydride” Hydrogen Energy, 33(17), 4634-4639, (2008).

5- Gürü, M., Y. Akyüz, E. Akın, "Mermer Tozu/Polyester Kompozitlerde Dolgu Oranının Mekanik Özelliklere Etkileri”, Politeknik, 8(3), 271-274, 2005.

6-Alıcılar, A., M. Gürü, A. Murathan, F. Akkurt, "Baca Gazlarındaki Azot Oksitlerin Bentonit Üzerine Adsorpsiyon Yoluyla Dolgulu Kolonlarda Giderilmesi“, Journal of Science, 16(2), 319, 2003.

7-Murathan, A., G. Özkan, M. Gürü, "Atık Sulardan Civanın Dolgulu Yataklarda Giderilmesi", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 15(1), 115-120, 2002.

8-Gürü, M., A. Alıcılar, "Fuel Oildeki Kükürdün Organik Esaslı Metal Bileşiklerle Külde Tutulması", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 14 (2), 435-444, 2001.

9-Gürü, M., A. Alıcılar, "Seçici Yükseltgen Maddelerle Kömürün Desülfürizasyonu", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 14 (3), 907-911, 2001.

10-Alıcılar A., Kılıç E., Gürü M. "Metal İşleme Atık Sularında Siyanürlerin Bentonit Üzerine Adsorpsiyonunun Kesikli Sistemde İncelenmesi", G.Ü.Fen Bil. Ens. Dergisi, 14 (2), 553, 2001.

11-Gürü, M., "Uçucu Kül ve Pirinadan Plastik Kompozit Malzeme Üretimi", Politeknik, 4 (1), 35-38, 2001.

12-Karadavut, S., A. Alıcılar, M. Gürü, "Sulardaki Sülfür Kirliliğinin Dolgusuz, Dolgulu ve Katalitik Dolgulu Kolonlardaki Oksidasyonunun Karşılaştırılması, O.M.Ü. Fen Bilimleri Dergisi, 11(1), 25-30, 2000.

13-Alıcılar, A., A. Murathan ve M. Gürü, "Dispers Sarı 3 Tekstil Boyar Maddesinin Sentezi ve Uygulanabilirliğinin Araştırılması", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 13(1), 221-228, 2000.

14-Gürü, M. ve A. Murathan, "Atık Sulardaki Fenol ve Hidrazinin Dolgulu Kolonlarda Giderimi", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 13(2), 415-424, 2000.

15-Gürü, M., "Değişik Yapıdaki Kömürlerde Etüv Metodu ile Higroskopik Su Tayininin Uygulanabilirliği", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 12(3), 759-764, 1999.

16-Gürü, M. ve A. Murathan, "Atık Kağıtlardan Levülinik Asit Elde Edilmesi", Gazi Üniversitesi Fen Bilimleri Enst. Dergisi, 11(4), 771-776, 1998.

17-Gürü, M., "Yakıt Katkı Maddeleri ve TS 11630", Standard Dergisi, 421, 86-87, Ocak 1997.

18-Dursun. Ş., M. Gürü, M. Yiğitoğlu, "Değişen Dünyada Solventlerin Çevreye Etkileri, N. Ü. Fen Bilimleri Dergisi, 1, 81-90, l996.

19-Alıcılar, A., M. Gürü ve M. Murathan, "Küresel Dolgulu ve Aşağı Doğru Paralel Akışlı Reaktörlerde Kolon Uzunluğunun Basınç Düşüşüne Etkisi", G. Ü. M. M. F. Dergisi, 9(1), 53-60, 1994.

20-Gürü, M., A. Alıcılar, M. Doğan, "A Study on Optimization of Denizli-Kızıldere Geothermal Power Plant", J. of The Institute of Science and Technology of Gazi University, 5, 43, January 1992.

21-Doğan, M., M. Gürü, A. Alıcılar, "A Study on Corrosion of Steel in Concrete", J. of The Institute of Science and Technology of Gazi University, 4, 38, January 1991.

D.Kitaplar:

1- Yalçın, H. ve M. Gürü, "Mühendislik Termodinamiği Problemleri", Palme Yayıncılık, ISBN: 975-8624-89-4, Ankara, 2004.

2- Yalçın, H. ve M. Gürü, "Malzeme Bilgisi", Palme Yayıncılık, ISBN: 975-8624-13-X, Ankara, 2002.

3-Yalçın, H. ve M. Gürü, "Stokiometri Problemleri", Palme Yayıncılık, ISBN: 975-8624-12-1, Ankara, 2002.

4- Yalçın, H. ve M. Gürü, "Su Teknolojiisi", Palme Yayıncılık, ISBN: 975-8624-14-8, Ankara, 2002.

5- Yalçın, H. ve M. Gürü, "Stokiometri", Palme Yayıncılık, ISBN: 975-7477-65-6, Ankara, 2000.

6- Yalçın, H. ve M. Gürü, "Mühendislik Termodinamiği-Genişletilmiş 2.Baskı", Palme Yayıncılık, ISBN: 975-8624-88-1, Ankara, 2004.(TÜBA-Türkiye Bilimler Akademisi 2008 Yılı Üniversite Ders Kitapları Kayda değer Eser Ödülü kazandı).

7- Yalçın, H. ve M. Gürü, "Kimya Mühendisliği Temel Prensipleri Problemleri", Gazi Ü. Yayın No: 208, Müh. Mim. Fak. Yayın No: 17, ISBN: 975-507-069-9, Ankara, 1996. (D.Ö. 20)

8- Yalçın, H. ve M. Gürü, "Çimento ve Beton”, Palme Yayıncılık, ISBN: 9944-341-16-9, Ankara, 2006.

E. Atıflar: SCI da taranan dergilerde, kendisi dışında:

1- Atıfı: Gürü M., S. Tekeli, İ. Bilici, “Manufacturing of urea formaldehyde based composite particleboard from almond shell”, Material & Design, 27, 1148-1151, 2006

1-Atıf:Leiva P, Ciannamea E, Ruseckaite RA, et al. Medium-density particleboards from rice husks and soybean protein concentrate  JOURNAL OF APPLIED POLYMER SCIENCE 106 (2): 1301-1306 OCT 15 2007.

2- Atıf: Nemli, G., Yildiz, S., Derya Gezer, E. The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing Bioresource Technology 99 (14), pp. 6054-6058, 2008.

3- Atıf: Liu, Y.-Q., Tian, Y., Zhao, G.-Z., Sun, Y.-Y., Zhu, F.-T., Cao, Y. Synthesis of urea-formaldehyde resin by melt condensation polymerization Journal of Polymer Research 15 (6), pp. 501-505, 2008

4- Atıf: Nemli, G., Demirel, S., Gümüşkaya, E., Aslan, M., Acar, C., Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites, Waste Management, 29(3), 1129-1131, 2009.

2-Atıfı: Alicilar A, Komurcu M, Guru M, The removal of cyanides from water by catalytic air oxidation in a fixed bed reactor, CHEM ENG PROCESS 41 (6): 525-529 JUL 2002.

1-Atıf: Levec J, Pintar A., “Catalytic wet-air oxidation processes: A review”, CATALYSIS TODAY, 124 (3-4): 172-184 JUN 30 2007

2-Atıf: Stoyanova MK, Christoskova SG, Novel Ni-Fe-oxide systems for ctalytic oxidation of cyanide in an aqueous phase, ENTRAL EUROPEAN JOURNAL OF CHEMISTRY 3(2):295-310 APR 2005.

3-Atıf: Ghiaci M, Abbaspur A, Kalbasi RJ, Vapor-phase Beckmann rearrangement of cyclohexanone oxime over H₃PO₄/ZrO₂-TiO₂ APPL CATAL A-GEN 287 (1): 83-88 JUN 15 2005

4-Atıf: Stoyanova M, Christoskova S, Georgieva M, Aqueous phase catalytic oxidation of cyanides over iron-modified cobalt oxide system, APPL CATAL A-GEN 274 (1-2): 133-138 OCT 28 2004

5-Atıf: Say R, Ersoz A, Turk H, et al. Selective separation and preconcentration of cyanide by a column packed with cyanide-imprinted polymeric microbeads SEPARATION AND PURIFICATION TECHNOLOGY 40 (1): 9-14 NOV 15 2004

6- Atıf: Dash, R.R., Gaur, A., Balomajumder, C.Cyanide in industrial wastewaters and its removal: A review on biotreatment Journal of Hazardous Materials 163 (1), pp. 1-11, 2009

7- Atıf: Christoskova, St., Stoyanova, M., Catalytic oxidation of cyanides in an aqueous phase over individual and manganese-modified cobalt oxide systems, Journal of Hazardous Materials 165 (1-3), pp. 690-695, 2009.

3- Atıfı: Gürü, M., U. Karakaya, D. Altıparmak, A. Alıcılar, "Improvement of Diesel Fuel Properties by Using Additives", Energy Conversion and Management, 43(8):1021-1025, 2002.

1- Atıf: Szklo A, Schaeffer R, “Fuel specification, energy consumption and CO2 emission in oil refineries”, ENERGY 32 (7): 1075-1092 JUL 2007

2- Atıf: Karonis D, Lois E, Zannikos F, et al., A neural network approach for the correlation of exhaust emissions from a diesel engine with diesel fuel properties, ENERG FUEL 17 (5): 1259-1265 SEP-OCT 2003

3- Atıf: Içingür, Y., Altıparmak D., Experimental analysis of the effects of fuel injection pressure and fuel cetane number on direct injection diesel engine emissions, Turkish Journal of Engineering and Environmental Sciences 27 (5), pp. 291-297, 2003.

4- Atıf:de Menezes EW, da Silva R, Cataluna R, et al. Effect of ethers and ether/ethanol additives on the physicochemical properties of diesel fuel and on engine tests, FUEL 85 (5-6): 815-822 MAR-APR 2006.

5- Atıf: Ma, L.-C., Liu, Y.Study on the soot reduction and the mechanism by organometallic compounds in a diesel engine, Journal of Fuel Chemistry and Technology 34 (2), pp. 230-233, 2006.

6- Atıf: Wang, J., Xie, C., Tan, J. Development of P(DBF-VA) low temperature flow improver for diesel fuel  Speciality Petrochemicals 23 (6), pp. 22-25, 2006.

7- Atıf: Ribeiro NM, Pinto AC, Quintella CM, et al. The role of additives for diesel and diesel blended (Ethanol or biodiesel) fuels: A review, ENERGY & FUELS 21 (4): 2433-2445 JUL-AUG 2007

8- Atıf: Kim DC, Kim JH, Woo JK, et al.A new iron-nanofluid as fuel additive for particulate matter reduction in heavy fuel oil-fired boiler facility ASIAN JOURNAL OF CHEMISTRY , 20(7), 5767-5775, SEP-OCT 2008.

9- Atıf: Kim DC, Song KC, Kaushk RD, A Fuel additives for particulate matter/dust reduction, ASIAN JOURNAL OF CHEMISTRY , 20(7), 5767-5775, SEP-OCT 2008.

10- Atıf: Gonen, M., Balkose, D., Inal, F., Ulku, S. The effect of zinc stearate on thermal degradation of paraffin wax, Journal of Thermal Analysis and Calorimetry 94 (3), pp. 737-742, 2008.

4- Atıfı: Gürü, M., A.Y. Bilgesü, V. Pamuk, "Production of oxalic acid sugar beet molasses with nitric acid and nitrogen oxides", Bioresource Technology, 77, 81-86, 2001.

1- Atıf: Rymowicz W, Lenart D Oxalic acid production from lipids by a mutant of Aspergillus niger at different pH, BIOTECHNOL LETT 25 (12): 955-958 JUN 2003.

2- Atıf: Musial I, Rymowicz W, Witkowska D, Effect of Span 20 concentration on oxalic acid production from post-refining fatty acids by Aspergillus niger XP, CHEMICAL PAPERS-CHEMICKE ZVESTI 60 (5): 388-390 OCT 2006

3- Atıf: Musial, I., Rymowicz, W., Witkowska, D., Effect of Span 20 concentration on oxalic acid production from post-refining fatty acids by Aspergillus niger XP, Chemical Papers 60 (5), pp. 388-390, 2006.

5- Atıfı: Birey, M., H. Aktaş, A. Alıcılar and M. Gürü, "ESR Spectroscopics Study of Radicals Formed from Methoxycarbonylcholine Picrate Hemihydrate", Radiation Effects and Defects in Solids, 140, 365-371, 1997.

1- Atıf: Kent S, Ozmen A, Birey M., ESR study of gamma-irradiated N-alpha-Acetyl-L Histidine Monohydrate, RADIAT EFF DEFECT S 158 (8): 599-602 AUG 2003

2- Atıf: Birey, M., Electron spin resonance of gamma irradiated single crystals of methyl glycinate hydrochloride, Z NATURFORSCH A 57 (1-2): 36-38 JAN-FEB 2002.

3- Atıf: Osmanoğlu, Ş., Başkan, M.H., Electron paramagnetic resonance of gamma irradiation damage centres in acetyl and carbamyl-β-methyl choline chloride, Journal of Chemical Research-Part S (1), pp. 26-27,2003.

4- Atıf: Aras, E., Asik, B., Buyum, M., Birey, M. EPR spectroscopy of γ-irradiated single crystals of 5-methyle-2-nitrophenol, Radiation Effects and Defects in Solids 162 (2), pp. 87-93, 2007.

5- Atıf: Caliskan, B., Civi, M., Birey, M. Electron paramagnetic resonance characterization of gamma irradiation damage centers in S-butyrylthiocholine iodide single crystal Radiation Effects and Defects in Solids, 162 (2), pp. 87-93, 2007.

6- Atıfı: Alıcılar, A., M. Doğan and M. Gürü, "Optimization of Double Stage Flash System", International Journal of Energy Research, 19, 169-179, 1995.

1- Atıf: Demirbas A., Turkey's geothermal energy potential, ENERGY SOURCE 24 (12): 1107-1115 DEC 2002

2- Atıf: Selek-Murathan, A.,  Murathan A.M., Demirbaş A., Electricity production from geothermal sources by using double-stage flash system Energy Sources, Part A: Recovery, Utilization and Environmental Effects 30 (20), pp. 1884-1889, 2008.

7- Atıfı: Gürü, M., "Production of oxalic acid sugar beet molasses with nitric acid and nitrogen oxides and determination of optimum conditions”, PhD Thesis, Gazi Univ Sci and Tech Ins, Ankara, Turkey, 1992.

1- Atıf: Murathan A, Bicer A, Alicilar A, et al., Effects of various parameters on removal of NO2 gases in fixed beds by adsorption on sepiolite, WATER AIR SOIL POLL 132 (3-4): 365-372 DEC 2001

2- Atıf: Pamuk, V., M. Yılmaz and A. Alıcılar, "The preparation of D-glucaric acid by oxidation of molasses in packed beds", Journal of Chemical Technology and Biotechnology, 75:1-5, 2000.

8- Atıfı: H. Yalçın, M.Gürü, Su Teknolojisi, Palme Yayıncılık - ANKARA, 2002.

1- Atıf: Kaya, N., E. Karadurmuş, A. Alıcılar, “Catalytic air oxidation of Manganese in synthetic waters”, Central European Journal of Chemistry,  3(3): 511-519, 2005.

9- Atıfı: A.F. Qasrawi, T.S. Kayed, A. Mergen, M. Gürü, Synthesis and characterization of Mg₂B₂O₅, Material Research Bulletin, 40, 583-589, 2005.

1- Atıf: Jiang JW, Wang L, Yang Q, et al.Synthesis of magnesium borate nanorods by sol-gel process, J. OF INORGANIC MATERIALS 21 (4): 833-837 JUL 2006

2- Atıf: Obut, A., Thermal syntheses of magnesium borate compounds from high-energy milled MgO-B2O3 and MgO-B(OH)3 mixtures, Journal of Alloys and Compounds 457 (1-2), pp. 86-89, 2008.

3- Atıf: Zeng, Y., Yang, H., Fu, W., Qiao, L., Chang, L., Chen, J., Zhu, H., (...), Zou, G. Synthesis of magnesium borate (Mg₂B₂O₅) nanowires, growth mechanism and their lubricating properties Materials Research Bulletin 43 (8-9), pp. 2239-2247, 2008.

10- Atıfı: Duran Altıparmak, Ali Keskin, Atilla Koca, Metin Gürü ,“Alternative fuel properties of tall oil fatty acid methyl esters-diesel fuel blends”, Bioresource Technology, Vol. 98, 241-246, 2007.

1- Atıf: Kurzin, A.V., Evdokimov, A.N., Pavlova, O.S., Antipina,V.B. Synthesis and characterization of biodiesel fuel based of esters of tall oil fatty acids  Russian Journal of Applied Chemistry 80 (5), pp. 842-845, 2007.

2- Atıf: Sadrameli, S.M., Green, A.E.S., Systematics of renewable olefins from thermal cracking of canola oil, Journal of Analytical and Applied Pyrolysis 78 (2), pp. 445-451, 2007.

3- Atıf:Brito A, Borges ME, Otero N “Zeolite Y as a heterogeneous catalyst in biodiesel fuel production from used vegetable oil”, ENERGY & FUELS 21 (6):3280-3283 NOV-DEC 2007  

4- Atıf Walisiewicz-Niedbalska W, Kijenski J, Lipkowski AW, et al., Progress in the R&D of making biodiesels, PRZEMYSL CHEMICZNY 85 (12):1586-1591, 2006.

5- Atıf: Lapuerta, M., Armas, O., Rodríguez-Fernández, J., “Effect of biodiesel fuels on diesel engine emissions”, Progress in Energy and Combustion Science 34 (2), pp. 198-223, 2008.

6- Atıf: Moraes MSA, Krause LC, da Cunha ME, et al., Tallow biodiesel: Properties evaluation and consumption tests in a diesel engine, ENERGY & FUELS    22,(3), 1949-1954, 2008  

7- Atıf: Alptekin E, Çanakçı M. Determination of the density and the viscosities of biodiesel-diesel fuel blends, Renewable Emergy, 33(12), 2623-2630, 2008

8- Atıf:  Karabektas, M., Ergen, G., Hosoz, M.The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine, Applied Thermal Engineering 28 (17-18), pp. 2136-2143, 2008.

9- Atıf: Albuquerque, M.C.G., Machado, Y.L., Torres, A.E.B., Azevedo, D.C.S., Cavalcante Jr., C.L., Firmiano, L.R., Parente Jr., E.J.S., Properties of biodiesel oils formulated using different biomass sources and their blends, Renewable Energy, 34(3), 857-859, 2009

10- Atıf:Mikulášik, R., Šurina, I., Katuščák, S., Cvengroš, J., Polovka, M., Preparation of biodiesel from tall oil, Chemicke Listy 102 (15 SPEC. ISS.), pp. s552-s555, 2008.

11- Atıf: Karabektas, M., The effects of turbocharger on the performance and exhaust emissions of a diesel engine fuelled with biodiesel, Renewable Energy, 34(4), 989-993, 2009.

12- Atıf: Keskin, A.,Biodiesel production from free fatty acids obtained with neutralization of the crude glycerin, Energy Resources PartA, 31(1) 17-24, 2009

13- Atıf: Çelikten, İ, Arslan, M.A. Investigation of diesel fuel, rape oil and soybean oil methyl esters effects on a direct injection diesel engine performance and emissions, Journal of the Faculty of Engineering and Architecture of Gazi University 23 (4), pp. 829-836, 2008.

14- Atıf: Ulusoy Y, Arslan R, Kaplan C, Emission Characteristics of Sunflower Oil Methyl Ester, ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 31(11), 906-910, 2009.

15-Atıf: Basha, S.A., Gopal, K.R., Jebaraj, S., A review on biodiesel production, combustion, emissions and performance, Renewable and Sustainable Energy Reviews 13 (6-7), pp. 1628-1634, 2009

16-Atıf: Gokalp B, Soyhan HS, Sarac HI, et al., Biodiesel Addition to Standard Diesel Fuels and Marine Fuels Used in a Diesel Engine: Effects on Emission Characteristics and First- and Second-Law Efficiencies, ENERGY & FUELS, 23, 1849-1857, 2009

17- Atıf: Palit S, Mandal BK, Ghosh S, et al., PERFORMANCE AND EMISSION CHARACTERISTICS OF BIO-DIESEL AS AN ALTERNATIVE DIESEL ENGINE FUELES2008: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY - 2008, VOL 1   Pages: 477-487   Published: 2009

11- Atıfı: Tekeli, S., Gürü, M., “The factors affecting colloidal processing of 8YSCZ ceramics”, Key Engineering Materials, 280-283 (I), pp. 729-734(2005) .

1- Atıf: Eilers, H., Fabrication, optical transmittance, and hardness of IR-transparent ceramics made from nanophase yttria Journal of the European Ceramic Society 27 (16), pp. 4711-4717, 2007.

12- Atıfı: Gürü, M., İçen, H., “Obtaining of caffeine from Turkish tea fiber and stalk wastes”, Bioresource Tech., 94(1), 17-19, 2004.

1- Atıf: Conney, A.H., Zhou, S., Lee, M.-J., Xie, J.G., “Yang, C.S., Lou, Y.R., Lu, Y. Stimulatory effect of oral administration of tea, coffee or caffeine on UVB-induced apoptosis in the epidermis of SKH-1 mice”, Toxicology and Applied Pharmacology 224 (3), pp. 209-213(2007)

2- Atıf:Jin T, Zhang Z, El-Din MG, Agricultural wastes, WATER ENVIRONMENT RESEARCH 77: 1661-1727 2005.

3- Atıf: Ye, J.H., Jin, J., Liang, H.L., Lu, J.L., Du, Y.Y., Zheng, X.Q., Liang, Y.R., Using tea stalk lignocellulose as an adsorbent for separating decaffeinated tea catechins, Bioresource Technology 100 (2), pp. 622-628, 2009.

13- Atıfı: Tuncer Çaykara, Şerife Şirin Alaslan, Metin Gürü, Hatice Bodugöz, Olgun Güven, Preparation and characterization of poly(isobutyl methacrylate) microbeads with surface grafted amidoxime groups, Radiation Physics and Chemistry, 76, 1569-1576, 2007.

1- Atıf:Safa, K.D., Nasirtabrizi, M.H. , Tofangdarzadeh, S. Synthesis and characterization of glycidyl methacrylate polymers containing tris(trimethylsilyl)... groups Iranian Polymer Journal (English Edition, (2008)).

2- Atıf: El-Sawy NM, Ismail SA, Ali AEH, Polymerization of Prepared 3-N-Acryloylamidobenzonitrile by Gamma Irradiation and Its Use in Adsorption of Chromium Ions, JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY   : 46 ,1  pp: 25-31 2009.

14- Atıfı: Gürü, M., "Improvement of Adhesion of Bitumen-Aggregate Coatings by Additive", Cell. Chem. & Tech., 38 (1-2), 129-140, 2004.

1-Atıf:Rodríguez-Valverde, M.A. , Ramón-Torregrosa, P. , Páez-Dueñas, A.
Imaging techniques applied to characterize bitumen and bituminous emulsions (2008) Advances in Colloid and Interface Science

15- Atıfı:Ali Keskin, Metin Gürü, Duran Altıparmak, “Biodiesel production from tall oil with synthesized Mn and Ni based additives on fuel consumption and emissions”, Fuel, Vol 86/7-8 pp 1139-1143, 2007.

1-Atıf Nikiema, J., Heitz, M., Biodiesel. II. Production - A synthesis | [Le biodiesel. II. Production - Une synthèse], Canadian Journal of Civil Engineering 35 (1), pp. 107-117, 2008

2-Atıf Nikiema, J., Heitz, M. Biodiesel. I. Characteristics, assets and limitations - A synthesis [Le biodiesel. I. Caractéristiques, atouts et limites - Une synthèse] , Canadian Journal of Civil Engineering, 35 (1), pp. 95-106  2008

3-Atıf Keskin A, Biodiesel production from free fatty acids obtained with neutralization of the crude glycerin, Energy Sources Part A, 31(1),17-24,2009.

4- Atıf: Sarin, R., Kumar, R., Srivastav, B., Puri, S.K., Tuli, D.K., Malhotra, R.K., Kumar, A., Biodiesel surrogates: Achieving performance demands, Bioresource Technology 100 (12), pp. 3022-3028, 2009

5- Atıf: Saleh, H.E., Experimental study on diesel engine nitrogen oxide reduction running with jojoba methyl ester by exhaust gas recirculation, Fuel 88 (8), pp. 1357-1364, 2009.

6- Atıf:

16- Atıfı: Tekeli S, A. Güral, M. Gürü, “Influence of Tempering Temperature and Microstructure on Wear Properties of Low Alloy PM Steel with 1-2 % Ni Addition”, Materials Science Forum, Vols 534-536, 629-632, 2007.

1-Atıf Sampathkumaran, P., Ranganathaiah, C., Seetharamu, S., Kishore, Processes-induced structural transformations and the impact properties of Cr-Mn iron systems, Materials and Manufacturing Processes 23 (3), pp. 320-325, 2008.

17- Atıfı: Murathan, A., A.S. Murathan, M. Gürü, M. Balbaşı, “Manufacturing low density boards from waste cardboards containing aluminium, Material and Design, 28(7), 2215-2217, 2007 .

1- Atıf: Ayrilmis, N., Candan, Z., Hiziroglu, S. Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay Materials and Design 29 (10), pp. 1897-1903, 2008.

2- Atıf: Gombos AM, Nemes O, Soporan VF, et al.,  Toward new composite materials starting from multi-layer wastes, STUDIA UNIVERSITATIS BABES-BOLYAI CHEMIA 53 (3), 81-86 2008

18- Atıfı: A. Mergen, T.S. Kayed, M. Bilen, A.F. Qasrawi, M. Gürü, “Production of Anorthite from Kaolinite and CaCO₃ via Colemanite”, Key Engineering Materials, June 5^th, Vols 264-268, 1475-1478, 2004.

1- Atıf: Kavalcı,S., Yalamaç,E, Akkurt S. Effects of boron addition and intensive grinding on synthesis of anorthite ceramics Ceramics International 34 (7), pp. 1629-1635,2008.

19- Atıfı: Tekeli, S., M. Gürü, “Indentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte Material”, J. Key Engineering Materials, Vols.336-338, 2418-2421, 2007.

1-Atıf: Tekeli, S, Boyacıoğlu, T., Güral, A., “The effect of silica doping on the microstructure and mechanical properties of c-ZrO2/SiO2 composites”, Ceramics International 34 (8), pp. 1959-1964, 2008.

20- Atıfı: Çetin Çakanyıldırım, Metin Gürü, “Processing of LiBH₄ from its elements by ball milling method” Renewable Energy, 33(11), 2388-2392, 2008.

1-Atıf:

21- Atıfı: Metin Gürü, Duygu Venedik, Ayşe Murathan, “Removal of trivalent chromium from water using low cost natural diatomite”, Hazardous Material, 160(2-3), pp.318-323, 2008.

1-Atıf: Sheng, G., Wang, S., Hu, J., Lu, Y., Li, J., Dong, Y., Wang, X., Adsorption of Pb(II) on diatomite as affected via aqueous solution chemistry and temperature, Colloids and Surfaces A: Physicochemical and Engineering Aspects 339 (1-3), pp. 159-166, 2009.

2- Atıf: Malamis, S., Katsou, E., Chazilias, D., Loizidou, M., Investigation of Cr(III) removal from wastewater with the use of MBR combined with low-cost additives, Journal of Membrane Science 333 (1-2), pp. 12-19, 2009.

3- Atıf: Kumar, P.A., Ray, M., Chakraborty, S., Adsorption behaviour of trivalent chromium on amine-based polymer aniline formaldehyde condensate, Chemical Engineering Journal 149 (1-3), pp. 340-347, 2009.

22- Atıfı: Keskin A., M. Gürü, D. Altıparmak and K. Aydın, “Using of cotton oil biodiesel-diesel fuel blends as alternative diesel fuel”, Renewable Energy, 33(4), 553-557, 2008

1-Atıf: Keskin A, Biodiesel production from free fatty acids obtained with neutralization of the crude glycerin, Energy Sources Part A:Recovery, Utilization and Environmental Effects 31 (1), pp. 17-24, 2009

2 Atıf: Fjerbaek L, Christensen KV, Norddahl B, A Review of the Current State of Biodiesel Production Using Enzymatic Transesterification, BIOTECHNOLOGY AND BIOENGINEERING 102 (5) 1298-1315, 2009

23-Atıfı: Çetin Çakanyıldırım, Metin Gürü, “Hydrogen cycle with sodium borohydride” Hydrogen Energy, 33(17), 4634-4639, (2008)

1-Atıf: Andrieux, J., Swierczynski, D., Laversenne, L., Garron, A., Bennici, S., Goutaudier, C., Miele, P., (...), Bonnetot, B. A multifactor study of catalyzed hydrolysis of solid NaBH4 on cobalt nanoparticles: Thermodynamics and kinetics , International Journal of Hydrogen Energy 34 (2), pp. 938-951, 2009.

2-Atıf: Akdim, O., Demirci, U.B., Muller, D., Miele, P., Cobalt (II) salts, performing materials for generating hydrogen from sodium borohydride, International Journal of Hydrogen Energy 34 (6), pp. 2631-2637, 2009.

3-Atıf: Akdim, O., Demirci, U.B., Miele, Ten-year efforts and a no-go recommendation for sodium borohydride for on-board automotive hydrogen storage, International Journal of Hydrogen Energy 34 (6), pp. 2638-2645, 2009

4-Atıf: Marrero-Alfonso EY, Beaird AM, Davis TA, et al., Hydrogen Generation from Chemical Hydrides, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH 48(8), 3703-3712, 2009

24- Atıfı: S.Tekeli, M.Gürü, O.E.Sağlam, Densification and grain-growth behavior of various amounts of SiO₂ doped 8YSCZ/SiO₂ composites, Materials and Manufacturing  Processes, 22: 1-5, 2007

1- Atıf:  T.S. Zhang, S.H. Chan, W. Wang, K. Hbaieb, L.B. Kong and J. Ma,^cEffect of Mn addition on the densification, grain growth and ionic conductivity of pure and SiO₂-containing 8YSZ electrolytes, J.Solid State Ionics, 180(1), 2009, pp. 82 – 89.

G1. Uluslar arası Bilimsel toplantılarda sunulan ve basılan bildiriler:

1- Metin Gürü, Atilla Koca, Özer Can, Can Çınar, Fatih Şahin, “Mg katkılı hayvansal kökenli biyodizelin Dizel motor performansı ve egzoz emisyonlarına etkilerinin incelenmesi”, 10. Uluslar arası Yanma Sempozyumu, sayfa: 366-370, Sakarya Üniversitesi, 8-10 Ekim 2008, ADAPAZARI

2- Çubuk, M., Gürü M, Çubuk K, “Uçucu kül ve hurda araç lastiğinin epoksi reçineye dozlanmasıyla bitüm katkı maddesi olarak ekonomiye kazandırılması“, Blacksea international environmental symposium, 24-29 Ağustos 2008, Giresun.

3- Tekeli, S., A. Kayış, O. Gürdal, M.Gürü,  “Microstructural And Electrical Conductivity Relationships In Alumina-Containing Yttria Stabilized Cubic Zirconia Used As A Solid Electrolyte In Solid Oxide Fuel Cells”, Escola Politecnica da Universidade de Sao Paulo, 3-6 Eylül, Rio, 2007, Rio-Brasil.

4- Serda Kaya, Metin Gürü, İrfan Ar, “Processing of Mg(BH₄)₂ from Its Elements and Its Usage in Hydrogen Recycleé, Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2007, Book of Abstracts p. 211, İstanbul-Turkey, 13-15 July 2007.

5- Serda Kaya, Metin Gürü, İrfan Ar, “Processing of Mg(BH₄)₂ from Mg and B₂O₃ by Solid Phase Reaction and Its Usage as Hydrogen Carrier”, Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2007, Book of Abstracts p.243, İstanbul-Turkey, 13-15 July 2007.

6-Gürü, M., Ç. Çakanyıldırım, S.Tekeli, H.Canan Cabbar, ‘Processing of Cer-Met Composite Material from Zn and B₂O₃, 3rd China-Europe Symposium on Processing and Properties of Reinforced Polymers, 11-15 Haziran 2007, Budapeşte-MACARİSTAN.

7- Özgecan Barlay Ergu, H.C Cabbar,., M.Gürü, PREPARATION AND CHARACTERIZATION OF ALUMINA-ZIRCONIA COMPOSITE MATERIAL WITH DIFFERENT ACID RATIOS BY THE SOL-GEL METHOD3rd China-Europe Symposium on Processing and Properties of Reinforced Polymers, 11-15 Haziran 2007, Budapeşte-MACARİSTAN

8- Tekeli, S., T. Boyacıoğlu, M.Gürü, ‘Microstructural, Mechanical and Electrical Properties of Alumina Doped Yttria-Stabilized Cubic Zırconia (c-ZrO₂) Used as a Electrolyte For Solid Oxide Fuell Cells (SOFC)’, 4th International Conference on Materials for Advanced Technologies 2007’, 1-6 Temmuz 2007, Singapur.

9- Çetin Çakanyıldırım, Metin Gürü, Synthesis of LiBH₄ and its usability as hydrogen storage, Somer Symposium Series 1 Innovation, Abstract Book p.70, 14-15 Mayıs 2007, METU, ANKARA.

10- Özyürek, D., Tekeli, S., Güral, A., Meyveci, A.,and Gürü, M., Microstructure and wear properties of alumina-reinforced aluminum composites produced by mechanical alloying method, International Meeting on Materials for Electronic Applications” IMMEA 2007 Abstract Book s.145, 30 Nisan-2 Mayıs 2007, Fas Marrakech.

11- Tekeli, S., M. Gürü, T. Boyacıoğlu, “Microstructure-Property relationship of c-ZrO₂/SiO₂ composites with various amounts of SiO₂ additions”, Recent Advances in Composite Materials, 20-23 Feb 2007, pp 534-540, New Delhi, India.

12- M. Gürü, B. Ayar, Ç. Çakanyıldırım, M. Bilen, Synthesis and Characterization of Zinc Borate Pigment Resistant to Corrosion and Stable at High Temperatures, 17th International Congress of Chemical and Process Engineering, 27-31 August 2006, Prague-Czech Republic.

13- Güral, A., Tekeli S., Özyürek D., Gürü M., “A Study on dry sliding wear behaviour of sintered 3Si-2Ni and 3Si-2Mn PM steels with various graphite content”, The 7^th Int. Conference of the Egyptian Society of Tribology, 27-28 Dec 2006 Fac. of Eng. Cairo University, EGYPT.

14- S. Tekeli, A.Akçimen, M.Gürü, O.Gürdal, “Effect of TiO₂ addition on phase stability and electrical conductivity of cubic zirconia used as an electrolyte in solid oxide fuel cells”, 210. Elektrokimya Kongresi, 28 ekim-3 kasım 2006, ECS Transactions, 3(9), 189-196 Cancun, Meksika.

15-.S.Tekeli, M.Gürü, O.E.Sağlam, Densification and grain growth behaviour of various amounts of SiO₂ doped 8YSCZ/SiO₂ composites, ACUN-5, International composites conference, Developments in comosites: Advanced, infrastructural, natural and nano-composites, Sydney, Australia 11-14 July, 2006

16-Süleyman Tekeli, Ahmet Güral and Metin Gürü, Influence of tempering temperature and microstructure on wear properties of low alloy PM steel with 1-2 % Ni addition, 2006 Powder Metallurgy World congress and exhibition, Busan, Korea 24-28 September 2006. 

17- Ahmet Güral, Süleyman Tekeli, Dursun Özyürek and Metin Gürü, Effect of repeated quenching heat treatment on microstructure and dry sliding wear behaviour of low carbon PM steel, 2006 Powder Metallurgy World congress and exhibition, Busan, Korea 24-28 September 2006.

18-M.Gürü, S.Tekeli, İ.Bilici, A.Güral and A.R.Karagöz, Production of Ti-Fe based MgAl₂O₄ composite maberial by pressureless infiltration method, MCM-2006 International conference on Mechanics of composite materials, Riga, Latvia, May 29-June 2, 2006.

19-S.Tekeli, M.Gürü, Effect of isothermal annealing on static grain growth behaviour of 8YSCZ ceramics with SiO₂ addition, International conference on advances in materials and processing technology (AMPT-2006), Lasvegas, USA, July-30-August 3, 2006.

20-Süleyman Tekeli, Ahmet Güral and Metin Gürü, Effect of Ni content on dry sliding wear behaviour of sintered low carbon PM steel, 1^st International Conference on Manufacturing and Material Processing, Kuala Lumpur, Malaysia, 14-16 March, 2006.

21-Tekeli, S., M. Gürü, “Effect of Various Amount of Al₂O₃ Addition on the Flexural Strength, Fracture Toughness and Hardness of c-ZrO₂/Al₂O₃ Composites Used as an Electrolyte for Solid Oxide Fuel Cell”, Materials Science & Technology, September 25-28, 2005, Pittsburgh, PA.

22- Güral, A., S. Tekeli, M. Gürü, “Effect of Different Heat Treatments on Microstructure of Ni Added Steels Produced by P/M Method”, EURO PM2005, 2-5 October 2005, Prague, Czech Republic.

23- Gürü, M., S. Tekeli, “Production of Urea-Formaldehyde Based Composite Particle Board From Apricot Shell with Fly Ash  Addition as a Flame Retardant”, ICCE-12 Twelfth annual international  conference on composites/nano engineering, University of New Orleans, 1-6 August 2005, Tenerife, Canary Islands, Spain.

24- Akyüz, Y., A. Biçer, M. Gürü, “Preparation of MgB₂/Al superconducting tape”, 7^th World Congress of Chemical Engineering, 10-14 July 2005, Glasgow-UK.

25- Gürü, M., S. Tekeli, M.K. Çubuk, M. Çubuk,  “Recycling Of Scrap Vehicle Tyre As Elastic Surface Materials”, The First Jordanian International Conference of Material Science and Engineering, 3-5 May 2005, Al-Balqa University, Al-Salt, Jordan.

26- Gürü, M., “Seçici Yükseltgen Madde Permanganat Çözeltisiyle Kömürün Desülfürizasyonu”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Universitesi-ANKARA.

27- Duran Altıparmak, Ali Keskin, Metin Gürü, “Ayçiçek yağı metil esterinin dizel motorlarda alternatif olarak kullanımı”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi -ANKARA.

28- Duran Altıparmak, Ali Keskin, H. Mustafa Yıldırım, Metin Gürü, “Dizel motorlarında fındık yağı metil esterinin alternatif yakıt olarak incelenmesi”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi-ANKARA.

29- Ali Keskin, Duran Altıparmak, Metin Gürü, “Mısır yağı metil esterinin dizel motorlarda alternatif yakıt olarak kullanımı”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi-ANKARA.

30- Mergen, A., M. Bilen, M. Gürü, "MgAl₂O₄ Spinel Fazının Sıvı Alüminyum Metali ile Etkileşimi", International Powder Metallurgy Conference, 4-6 September 2002, Gazi Üniversitesi-ANKARA.

31- Gürü, M., A. Murathan, A. Alıcılar, Ş.Dursun, "Yakıt Püskürtmeli Güç Santrallerinde Yanma Sorunları ve Çözümleri", 7th International Combustion Symposium, 17-18 July 2002, Gazi University-ANKARA.

32- Çubuk, M., M. Gürü, A. Alıcılar, "Kömürdeki Yanabilir Kükürdün Giderilmesinde Thiobacillus Mikroorganizmalarının Etkinliği", 7th International Combustion Symposium, 17-18 July 2002, Gazi University-ANKARA.

33- Dursun, Ş., M. Gürü, A. Murathan, "Effects of  SO₃ Formation on the Dew Point", 1 st International Workshop on Environmental Quality and Environmental Engineering in the Middle East Region, 5-7 October 1998, Selçuk University, Konya.

G2. Ulusal toplantılarda sunulan ve basılan bildiriler:

1- Çakanyıldırım, Ç, M.Gürü, İ. Bilici, “Atık demir talaşının boya olarak ekonomiye kazandırılması”, 8. Ulusal Kimya Mühendisliği Kongresi, 26-29 Ağustos 2008, Malatya.

2- Gürü, M., O. Gürdal, M.K. Çubuk, O. Ermiş, “Manyetik Yastıklı Hızlı Tren Tasarımı ve Projelendirilmesi”, TRODSA 2005 Trafik Ve Yol Güvenliği Kongresi, 349-356, 4-6 Mayıs 2005, Gazi Üniversitesi, ANKARA.

3- Gürü, M., M. Bilen, A.Mergen, “Sentez Al-MgOAl₂O₃ Kompozit Malzemenin Karakterizasyonu Ve Zırh Malzemesi Olarak Kullanabilirliği”, T.C. Milli Savunma Bakanlığı Zırh Teknolojileri Sempozyumu, 10-11 Mart 2005.

4- Yalçın, H., T. Koç ve M. Gürü, "Jeotermal Kaynaklardan Elektrik Üretimi", 5. Enerji ve Enerji Tasarrufu Semineri, 14-15 Ocak 1987, İstanbul.

5- Alıcılar, A., M. Gürü ve M. Doğan, "Düşük Sıcaklıklı Jeotermal Kaynaklardan Faydalanma Yolları", Fırat Havzası I. Çevre Sempozyumu, 13-15 Ekim 1988, Elazığ.

6- Gürü, M., "Manganlı Bileşiklerin Fuel-Oil Yakıtına Etkileri", 6. Enerji ve Enerji Tasarrufu Semineri, 11-13 Ocak 1988, İstanbul.

7- Alıcılar, A., M. Gürü, M. Doğan ve Ş. Dursun, "Katı Atıklardan Enerji Üretimi", 6. Enerji ve Enerji Tasarrufu Semineri, 11-13 Ocak 1988, İstanbul.

8- Alıcılar, A. ve M. Gürü, "Enerji Politikamız", Türkiye 6. Enerji Kongresi, Dünya Enerji Konseyi, 17-22 Ekim 1994, İzmir.

9- Gürü, M. ve A. Alıcılar, "Doğal Gaz ve Çevre", Türkiye 6. Enerji Kongresi, Dünya Enerji Konseyi, 17-22 Ekim 1994, İzmir

10- Murathan, M., A. Alıcılar, M. Gürü, "İzmir - Seferihisar Jeotermal Kaynaklardan İkili Flaş Sistemi ile Elektrik Üretimi için Optimum Flaş Sıcaklıklarının Belirlenmesi", Harran Ü. GAP I. Müh. Kong. Kitabı, 427-431, 1-3 Haziran 1996.

11- Ar, İ., A. Murathan, A. Alıcılar, M. Gürü, "Sulu Fazdaki Kurşunun Dolgulu Kolonlarda Uzaklaştırılması", Üçüncü Ulusal Kimya Mühendisiği Kongresi, 1-4 Eylül 1998, Atatürk Üniversitesi, Erzurum.

12- Ünal, E. N. ve M. Gürü, "Organometalik Mangan Katkı Maddesi ile Asfalt - Agrega Adezyonunun Artırılması", Üçüncü Ulusal Kimya Mühendisiği Kongresi, 1-4 Eylül 1998, Atatürk Üniversitesi, Erzurum.

13- Yalçın, H. ve M. Gürü, "Germencik-Ömerbeyli Jeotermal Kaynaklardan Elektrik Enerjisi Üretiminde Termodinamik Analizlerle Optimum Yöntemin Araştırlması", IV. Kimya ve Kimya Mühendisliği Sempozyumu, 10-12 Haziran 1987, Elazığ.

14- Murathan, A., M. Gürü, G. Özkan, "Atık Sulardan Civanın Uzaklaştırılması", XIII. Ulusal Kimya Kongresi, 31 Ağustos - 4 Eylül 1999, Ondokuz Mayıs Üniversitesi, Samsun.

15- Gürü, M. ve arkadaşları, "Şeker Pancarı Melasından Nitrik Asitle Okzalik Asite Yükseltgenmesinde Optimum Şartların Belirlenmesi", VII. Kimya ve Kimya Mühendisliği Sempozyumu, 2-5 Nisan 1991, Gazimağusa - Kıbrıs.

16-Gürü M, Arslan Ş.F.S., Çakanyıldırım Ç.,  Tufanbeyli linyitlerindeki yanabilir kükürdün nitrik asit çözeltisiyle uzaklaştırılması“, GAP V. Mühendislik Kongresi Bildiriler Kitabı, s. 443-448, 26-28 Nisan 2006, Harran Üniversitesi, Şanlıurfa.

17- Gürü M., Akın E., Akyüz Y., Özçelik E., Dilsiz N.,  Mermer Tozlarının ve Hurda Termoplastiklerin Polimer Kompozit Malzeme Üretiminde Değerlendirilmesi“, GAP V. Mühendislik Kongresi Bildiriler Kitabı, s. 247-252, 26-28 Nisan 2006, Harran Üniversitesi, Şanlıurfa.

18- Üncü, SE., T.Kıyak, M.Gürü, Kolofonun çelikli ve çeliksiz beton korozyonuna etkisi, 7. Elektrokimya Günleri Özet Kitabı s. 77, Hacettepe Üniversitesi Fen Fak. Kimya Bölümü, 28-30 Haziran 2006, ANKARA.

19- İbrahim Bilici, Metin Gürü, "Ayçiçeği saplarından üre-formaldehit esaslı kompozit malzeme üretimi“, UMES’07 Kongre kitabı 513-515, Kocaeli Üniversitesi, 20-22 Haziran 2007, KOCAELİ