|
1. Science Citation
Index’e Giren Makaleler
1. Garvey S., ÇOLAK İ. and Wright M.T., (1995), "Variable inertia test
for full-load temperature rise testing of induction machines",
IEE Proc.-Electr. Power Appl., Vol. 142, No. 3, pp. 222-224, May.
2. ÇOLAK
İ., Garvey S. and
Wright M.T., (1995) "Simulation of
induction machines using phase variables and the explicit inverse of the
inductance matrix", IJEEE International Journal of Electrical
Engineering Education, pp. 354-365, Vol. 32, No. 4, October.
3. ÇOLAK
İ. and Yılmaz E.
N., (1999) “Simulation
of the parallel connection of electrical power stations”, IJEEE
International Journal of Electrical Engineering Education, pp. 332-341, Vol.
36, No. 4, October.
4. ÇOLAK
İ., BAYINDIR R. and Bay Ö. F., (2003), “Reactive
power compensation using a fuzzy logic controlled synchronous motor”,
Energy Conversion and Management, Vol. 44, Issue 13, Pages 2059-2215, August.
5. ÇOLAK
İ., BAYINDIR R. and
SEFA İ., (2004), “Experimental
study on reactive power compensation using a fuzzy logic controlled synchronous
motor”, Energy
Conversion and Management,
Vol. 45, Issues 15-16, September 2004, Pages 2371-2391.
6. BAL G., BEKİROĞLU E., DEMİRBAŞ Ş. and ÇOLAK
İ., (2004), “Fuzzy
logic based DSP controlled servo position control for ultrasonic motor”, Energy Conversion and Management, Vol. 45, Issue 20, December, Pages
3127-3266.
7. ÇOLAK İ., BAYINDIR R., (2005), “A Novel Dynamic Reactive Power Compensator
Based On PIC”, Electric
Power Components & Systems, Vol. 33, Issue 8, August, Pages 861-876.
8. ÇOLAK İ., ÇELİK H., SEFA İ. and DEMİRBAŞ
Ş., (2005), “On Line Protection System for Induction
Motors”, Energy Conversion
and Management,
Vol. 46, Issues 17,
October, Pages
2773-2786.
9.
SAĞIROĞLU
Ş.,
ÇOLAK
İ.
and BAYINDIR R., (2006), "Power
factor correction technique based on artificial neural networks”,
Energy
Conversion and Management,
Vol.
47/18-19, pp. 3204-3215.
10.
ÇOLAK
İ.,
Koşalay İ. and İnan A., (2007), "Estimation
of magnetic field distributions in substation centers using artificial
neural networks”,
Journal
of Scientific & Industrial Research,
Vol.
66, No. 10, October, pp. 819-827.
11.
ÇOLAK
İ.
and İ. Koşalay (2008), "Neural
Network Estimation of RF Electromagnetic Pollution Near TV Broadcast
Transmitters”,
Microwave and Optical Technology Letters,
Vol. 50, No. 4, April, pp. 1004-1010.
12.
Bayindir R., Sefa
İ., ÇOLAK
İ.
and Bektaş A., (2008), "Fault
Detection and Protection of Induction Motors Using Sensors”,
IEEE Transactions on
Energy Conversion, Vol. 23,
No. 3, September, pp. 734-741.
13.
ÇOLAK
İ.,
Demirbas Ş., Sefa İ., Irmak E. and Kahraman H. T., (2008), "Remote
controlling and monitoring of a HVAC system over the Internet”,
Journal
of Scientific & Industrial Research, Vol. 67, No. 9,
September, pp. 680-684.
14.
BAYINDIR R., SAĞIROĞLU Ş. and
ÇOLAK İ. (2009), "An Intelligent Power Factor
Corrector for Power System Using Artificial Neural Networks”,
Electrical Power System Research, 79, pp. 152-160.
15.
ÇOLAK
İ.,
Demirbas Ş., Sağıroğlu Ş. and Irmak E. (2009), "A
Novel Web Based Laboratory for DC Motor Experiments”,
Electrical Power System Research. In publish.
16.
Irmak E., Bayindir R.
ÇOLAK
İ., and
Soysal M., (2009), "A
Remote Laboratory Experiment for 4-Quadrant Control of a DC Motor”,
Computer Applications in
Engineering Education . In publish.
17.
Sefa İ.
Demirtas M. and ÇOLAK
İ., (2009), " Application
of one-axis sun tracking system”,
Energy Conversion and
Management. In publish.
2. Engineering Index’e Giren Makaleler
1. ÇOLAK
İ., Bal G. and
Elmas Ç., (1996), "Review of the
testing methods for full-load temperature rise testing of induction
machines", EPE Journal, European Power Electronics and Drives,
pp. 37-43, vol. 6, No. 1, May.
2. Sefa
İ., Demirtaş M., Garip İ. and
ÇOLAK İ.
(2008), "Design
and Implementation of Parallel Operation Set of Alternators for Education
Purpose”,
Journal of the Faculty of Engineering and Architecture of Gazi
University, Vol. 23, No.
3, pp. 729-739.
3. Demirtaş M., Sefa
İ., Irmak E. and
ÇOLAK İ.
(2008), "Microcontroller
based DC/DC
Boost Converter for Solar Energy Systems”,
Journal of the Faculty of Engineering and Architecture of Gazi
University, Vol. 23, No.
3, pp. 719-728.
4. Demirbaş Ş., Irmak E., Bayhan S. and
ÇOLAK İ. (2008), "Mikrodenetleyici
ile Rotoru Sargılı Asenkron Motor Rotor Direncinin Değiştirilerek Tork ve
Hız Kontrolü”,
Journal of the Faculty of Engineering and Architecture of Gazi University,
Vol. 23, No. 4, pp. 801-810.
5.
Sagiroglu S.,
ÇOLAK İ. and Kahraman H. T., (2008), "Design
Transition to Adaptive Educational Hypermedia System From WEB based
Educational System:
Review of Design Approaches for the AEHS”,
Journal of the Faculty of Engineering and Architecture of Gazi
University,
Vol. 23, No. 4, pp. 837-852.
6 .
Bayindir R.,
ÇOLAK İ.,
Garip İ. and Bayhan S., (2008), "Microcontroller
Based Warning System for Right Phase Order and Phase Collapse for
Alternators”,
Journal of the Faculty of Engineering and Architecture of Gazi
University, will be published
in 2009.
3.
Engineering Index’e Giren Uluslararası Konferans Makaleleri
1. ÇOLAK
İ., Garvey S. and
Wright M.T., (1993), "Estimation of
induction machine parameters for simulation of a mixed-frequency test",
6th International Conference on Electrical Machinesand Drives,
8-10 September, pp. 208-212, Oxford, UK.
2. ÇOLAK
İ., Garvey S. and
Wright M.T., (1993), "Mixed-frequency
testing of induction machines using inverters", EPE'93, 5th
European Conference on Power Electronics and Applications, 14-17 September,
vol. 5, pp. 317-322, Brighton, UK.
3. ÇOLAK
İ., Elmas Ç., Bal
G., Coşkun İ., (1994), "High frequency
resonant DC link PWM inverters", in Proceedings of IEEE
Mediterranean Electrotechnical Conference MELECON, pp. 1251-1254,
Antalya Turkey, April.
4. Elmas Ç., Sağıroğlu Ş., ÇOLAK İ., Bal G., (1994), "Nonlinear
modelling of a switched reluctance drive based on neural networks",
in Proceedings of IEEE Mediterranean Electrotechnical Conference MELECON,
pp. 809-812, Antalya Turkey, April.
5. Elmas Ç, Sağıroğlu Ş., ÇOLAK İ., Bal G., (1994), "Modelling of a
nonlinear switched reluctance drive based on artificial neural networks",
in Proceedings of Fifth International Conference on Power Electronics and
Variable-Speed Drives, pp. 7-12, 26-28 October, London UK.
6. Bal G., Elmas Ç., ÇOLAK İ., Sefa İ., (1994), "Dynamic
response of a simple resistance compensation for field-oriented induction
motor", in Proceedings of the 29th Universities Power Engineering
Conference, pp. 386-389, 14, 15, 16 September, Ireland.
7. Bal G., Elmas Ç., ÇOLAK İ., Bay Ö. F., (1994), "Off-line
testing of an EKF algorithm for rotor resistance estimation of induction
motor drives", in Proceedings of the 29th Universities Power
Engineering Conference, pp. 501-504, 14, 15, 16 September, Ireland.
8. Garvey S., ÇOLAK İ. and Wright M.T., (1994), "Aspects of
mixed-frequency testing of induction machines", ICEM'94
International Conference on Electrical Machines, 5-8 September, pp.
623-628, Paris, France.
9.
Çolak I., Irmak
E., Demirbaş Ş. and Sağıroğlu Ş., (2007),
"A
Novel Integrated Web Based Learning System for Electric Machines Education",
International Conference on Power Enegineering, Energy and Electrical Drives
(POWERENG), Setübal, Portugal.
10.
Çolak I., Bayindir R., Bektaş
A., Sefa İ. and Bal G., (2007), "Protection
of Induction Motor Using PLC",
International Conference on Power Enegineering, Energy and Electrical Drives
(POWERENG), Setübal, Portugal.
11.
Irmak E., Bayindir R.,
COLAK İ., Sagiroglu S. and Bal G., (2008),
"A
Web Based Real Time Speed Control Experiment on Ultrasonic Motor for
Educational Purposes",
19th International Symposium
on Power Electronics, Electrical Drives, Automation and Motion Ischia
(Italy) 11 - 13 June.
12.
Demirtaş M., Sefa
İ., Irmak E. and
ÇOLAK İ.
(2008),
"Low-Cost
and High Sensitive Microcontroller Based Data Acquisition System for
Renewable Energy Sources",
19th International Symposium
on Power Electronics, Electrical Drives, Automation and Motion Ischia
(Italy) 11 - 13 June.
13.
Demirbaş Ş., Demirtaş M., Sefa
İ., and
ÇOLAK İ.
(2008),
"Building
of W&S Energy System",
19th International Symposium
on Power Electronics, Electrical Drives, Automation and Motion Ischia
(Italy) 11 - 13 June.
14.
ÇOLAK
İ., Sagiroglu S. and Kahraman H. T., (2008), "A
User Modeling Approach to Web Based Adaptive Educational Hypermedia Systems”,
Seventh
International Conference on Machine Learnnig and Applications ICMLA'08,
December 11-13, 2008, San
Diego, CA, USA.
15.
Bayindir R.,
ÇOLAK İ.,
Kabalci E. and Gorgun A., (2009), "A
New Approach to PID Controlled Synchronous Motor for Power Factor Correction ",
International Conference on Power Enegineering, Energy
and Electrical Drives (POWERENG), Lizbon, Portugal.
16.
ÇOLAK İ., Bayindir R.,
Kabalci E. and Sagiroglu S., (2009), "The
Design Analysis of a 5-Level Cascaded Voltage Source Inverter with Low THD",
International Conference on Power Enegineering, Energy
and Electrical Drives (POWERENG), Lizbon, Portugal.
17. Sefa
İ., Altin N., ÇOLAK İ.
and Ozdemir S., (2009), "18
PULSE CONTROLLED RECTIFIER",
EPE 2009, 8-10 September, Barcelona, Spain.
18. ÇOLAK İ., Bayindir
R. Bal G.and Kabalci E., (2009), "Modeling
of a Three Phase SPWM Multilevel VSI with Low THD Using Matlab/Simulink",
EPE 2009, 8-10 September, Barcelona, Spain.
4. Uluslararası
Konferans Makaleleri
1. ÇOLAK İ.,
ÜÇTAŞLI, M.B., DEMİRTAŞ, M., (2002), "Design of wear testing
machine which simulates occlusal wear", 7th Congress of the Balkan
Stomatological Society, Kuşadası-Turkey, March 28-3.
2. ÇOLAK İ.,
Koşalay İ. and Sefa İ., (2003), “Comparison
of high voltage open air isolated transformer centre and gas isolated transformer
centre in terms of electro magnetic compatibility”,
3rd International Conference of Advance Technologies, Gazi
University, Ankara-Turkey, pp. 362-367.
3. ÇOLAK İ.,
Koşalay İ. and Sefa İ., (2003), “ Cooperation
between municipalities and universities for controlling the electromagnetic
interference caused by buzz stations”, 1rd International
Municipalities University
and Industrial Sector Cooperation Symposium (ULYUSIS), 23-24
October, Ankara-Turkey.
4. ÇOLAK İ.,
Bayındır R. and Kahraman H. T., (2004), “Design
And Application of PIC 16F877
Based Air
Conditioner”, 2nd International Conference on
Technical and Phsical Problems in Power Engineering, 186-190 September, Tebriz-Iran.
5. ÇOLAK İ., Bayındır R. and Demirbaş Ş., (2004), “Use of PIC for Industrial Application”, 2nd International Conference on
Technical and Phsical Problems in Power Engineering, 655-658 September,
Tebriz-Iran.
6. ÇOLAK İ.,
Bayındır R. Sefa İ. and Demirtaş M., (2004), “Design of a Hybrid Energy Power System
Using Solar and Wind Energy”, 2nd International Conference on
Technical and Phsical Problems in Power Engineering, 776-778 Sptember,
Tebriz-Iran.
7.
ÇOLAK
İ.,
Demirbaş Ş., Irmak E., Bayındır R., (2005), “Teknik
Eğitimde İnternet Teknolojisinin Kullanımı”,
I. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi, 5-7
Eylül, İstanbul.
8. ÇOLAK İ.,
IRMAK E., BAYINDIR R., DEMİRBAŞ Ş. and SEFA İ., (2006), “Açık
veya Kapalı Döngü Denetim Sistemlerinin Web Tabanlı Benzetimi”,
6 th International Educational Technology Conference, Eastern
Mediterranean University,
pp.
446-451,
April, Gazimağusa, Kuzey Kıbrıs Türk Cumhuriyeti,.
9. ÇOLAK İ.,
IRMAK E., SEFA İ., DEMİRBAŞ
Ş. and BAYINDIR
R., (2006), “Temel
Elektrik Devrelerinin Analizi İçin İnternet Tabanlı Bir Eğitim Aracı”,
6 th International Educational Technology Conference, Eastern
Mediterranean University,
pp.
452-461,
April, Gazimağusa,Kuzey Kıbrıs Türk Cumhuriyeti.
10.
ÇOLAK İ., DEMİRBAŞ Ş., IRMAK E., SEFA İ., and BAYINDIR R. (2006), “Remote
Control of DC Motor Over the Internet”
TPE-2006
3rd Conference on Technical and Physical Problemsin Power Engineering,
pp. 216-219,
May 29-31, Gazi Üniversitesi, Ankara-Turkey, .
11.
ÇOLAK İ., BAYINDIR R., SEFA İ., DEMİRBAŞ Ş., and BAL G. (2006), “Developing
of a Control Unit for the Parallel Operation of AC Generators”
TPE-2006
3rd Conference on Technical and Physical Problemsin Power Engineering,
pp. 134-137,
May 29-31, Gazi Üniversitesi, Ankara-Turkey.
12.
ÇOLAK İ., BAYINDIR R., DEMİRBAŞ Ş. , SEFA İ., and BAL G. (2006), “Microcontroller
Based Protection of Induction Motors”
TPE-2006
3rd Conference on Technical and Physical Problemsin Power Engineering,
pp. 164-167,
May 29-31, Gazi Üniversitesi, Ankara-Turkey.
13.
ÇOLAK İ.,
Sağıroğlu Ş., Demirbaş Ş. And Irmak E., (2007), “Design
and Implementation of Internet Based Real-Time Laboratory for Vocational and
Technical Education”,
ICT 2007 Conference (for FP7 Challenge 3.4),
Ceylan Intercontinental Hotel, İstanbul, 29.01.2007 - 30.01.2007.
14.
Kahraman H. T.,
ÇOLAK
İ. and Sagiroglu Seref, (2007),
"A
Web Based Adaptive Educational System", Sixth International
Conference on Machine Learnnig and Applications ICMLA'07, December 13-15,
Cincinnati, Ohio-USA.
15.
Sagiroglu S.,
ÇOLAK
İ.,
Irmak E. and Bulut H., (2008),
"A
Virtual Laboratory Platform Based on . NET Framework",
2nd International Future-Learning
Conference On Innovations in Learning for the Future 2008:e-Learning,
pp. 800-807,
27-29 March, Istanbul, Turkey.
16.
ÇOLAK
İ.
and Sagiroglu S., Kahraman H. T.,(2008),
"Architechture
of Web Based Adaptive Educational Hypermedia System",
2nd International Future-Learning
Conference On Innovations in Learning for the Future 2008:e-Learning, pp.
358-365, 27-29
March, Istanbul, Turkey.
17. BAYINDIR
R., SEFA İ. DEMİRBAS Ş., ÇOLAK İ. and GORGUN A., (2008), "A
user Friendly Educational Tool for Observing Synchronous Motor Operation
Conditions”, TPE-2008
4rd
Conference on Technical and Physical Problemsin Power Engineering, pp.
216-219, 4-6 September, University of Piteşti, Piteşti, Romania.
18. COLAK İ., BAYINDIR R.,
IRMAK E. AND SOYSAL M., (2008), "A
New Tool for Four-Quadrant Drive System of DC Motor Based on Microcontroller”, TPE-2008
4rd
Conference on Technical and Physical Problemsin Power Engineering, pp.
216-219, 4-6 September, University of Piteşti, Piteşti, Romania.
19. ÇOLAK
İ.,
Sağıroğlu Ş. and Kahraman H. T., (2008), "
Design of Domain Model for
Web-Based Adaptive Educational Hypermedia Applications”, High
Technology in Education System Advancement and Current Trends in Teaching
Methodology, Ashgabat,
Türkmenistan.
20. ÇOLAK
İ.,
Sağıroğlu Ş. and Irmak E., Bayindir R. and Bal G., (2008), "
Design of an E-Laboratory
Platform for Electric Control Circuit”, High Technology in
Education System Advancement and Current Trends in Teaching Methodology, Ashgabat,
Türkmenistan.
21.
Demirtaş
M., Bal G.,
ÇOLAK İ., and
Yeşilbudak M., (2009), “Simulation
of Speed Control for Travelling Wave Ultrsonic Motor”, 5th International
Conference of Advance Technologies, Karabük University,
3-15 Mayıs,
Karabük-Turkey.
22.
Sefa İ., Demirtas M., ÇOLAK İ., and
Ugur D., (2009), “Simulation
of Paralel-Connected DC/DC Boost Converter for Hybrit Energy Sources”, 5th International
Conference of Advance Technologies, Karabük University,
3-15 Mayıs,
Karabük-Turkey.
23.
ÇOLAK İ.
ve Kosalay İ., (2009), “ Effects
of Artificial Neural Networks on Estimation of Radio Frequency
Electromagnetic Pollution caused by TV Transmitter”, 5th International
Conference of Advance Technologies, Karabük University,
3-15 Mayıs,
Karabük-Turkey.
24.
ÇOLAK İ., Kabalci
E. and Kabalci Y.,
(2009), "Hardware
Implementation for Electronics Laboratory:Design and Application of a
Microprocessor Controlled Oscilloscope”,
5 th International Vocational High School Symposium. Konya-Turkey.
25. COLAK İ.,
Kabalci E., BAYINDIR R. and IRMAK E., (2009), "MODELLING
OF AN SPWM CONTROLLED AC-DC-AC CONVERTER FOR FIXED SPEED WIND TURBINES”, TPE-2009
5rd
Conference on Technical and Physical Problems in Power Engineering, Bilbao,
Spain.
26. COLAK İ.,
Kabalci E., BAYINDIR R. and IRMAK E., (2009), "DESIGN
OF A 6-PULSE MULTILEVEL SPWM CONTROLLED CONVERTER FOR FIXED SPEED WIND
TURBINES”, TPE-2009
5rd
Conference on Technical and Physical Problems in Power Engineering, Bilbao,
Spain.
5. Ulusal Konferans
Makaleler
-
ÇOLAK
İ., Bayındır
R., Sefa İ., Demirbaş Ş., Demirtaş
M., (2005) "Güneş
Takip Sistemi Tasarım ve Uygulaması", 1. Enerji Verimliliği ve
Kalite Sempozyumu, TMMOB Elektrik Mühendisleri Odası Kocaeli Şubesi, sayfa
301-305, Mayıs.
-
ÇOLAK
İ., Bayındır
R., Sefa İ., Demirbaş Ş.,
Arslan
C., (2005) "Sanayide
Enerji Verimliliği", 1. Enerji Verimliliği ve Kalite Sempozyumu,
TMMOB Elektrik Mühendisleri Odası Kocaeli Şubesi, sayfa 336-3339, Mayıs.
-
ÇOLAK
İ.,
Bayındır R., Sefa İ., Demirbaş Ş., Ergen H., (2005), “Alternatif
Enerji Kaynaklarının Kullanımı”, III.
Yenilenebilir Enerji Kaynakları Sempozyumu ve Sergisi, 19-21 Ekim,
Çiftlikköy, Mersin.
-
Bayındır
R., Sefa İ., Demirbaş
Ş.,
ÇOLAK
İ., (2005), “Bulanık
Mantık Denetimli Senkron Motor İle Reaktif Güç Kompanzasyonu Benzetimi”,
Bilimde Modern Yöntemler Sempozyumu, 16-18 Kasım, Grand Yükseliş, Kocaeli.
-
Demirbaş
Ş.,
Irmak E., Sefa İ., Bayındır
R.,
ÇOLAK
İ., (2005), “Doğru
Akım Motorunun Web Tabanlı Modellenmesi ve Analizi”,
Bilimde Modern Yöntemler Sempozyumu, 16-18 Kasım, Grand Yükseliş, Kocaeli.
-
ÇOLAK İ., SEFA İ., and BAYINDIR R., DEMİRBAŞ Ş., and Demirtaş M.
(2006), “Hibrit Enerji
Sistemleri İçin Paralel Çalışabilen Boost Konvektör Simülasyonu”
VI.
Ulusal Temiz Enerji Sempozyumu,
sayfa 725-734, Mayıs 2006,
İsparta, Süleyman Demirel Üniversitesi.
-
ÇOLAK İ., SEFA İ., and BAYINDIR R., DEMİRBAŞ Ş., and Demirtaş M.
(2006), “Güneş Pillerinin
Elektrik Enerjisi Üretiminde Kullanımı”
VI.
Ulusal Temiz Enerji Sempozyumu,
sayfa 84-92, Mayıs 2006,
İsparta, Süleyman Demirel Üniversitesi.
-
Koşalay İ. and
ÇOLAK İ.,
(2008) “34.5 / 0.6
kV'luk Bir Orta Gerilim Transformatör Merkezindeki Elektromanyetik Alan
Değerlerinin İncelenmesi”
Elektrik-
Elektronik ve Bilgisayar Mühendisliği Sempozyumu, 26-30 Kasım 2008, Bursa.
-
ÇOLAK İ.
and Kabalcı E., (2008) “Evirici
Topolojileri ve Gelişimleri Üzerine Bir İnceleme”
Elektrik- Elektronik ve
Bilgisayar Mühendisliği Sempozyumu, 26-30 Kasım 2008, Bursa.
-
ÇOLAK İ.,
Kaplan O., Bayındır R. ve Kundakoğlu H., (2008) “Reaktif
Güç Kompanzasyonu Uygulamalarının Eğitim Amaçlı Benzetimi",
Elektrik- Elektronik ve
Bilgisayar Mühendisliği Sempozyumu, 26-30 Kasım 2008, Bursa.
6. Türkce Dergilerde Yayınlanan
Makaleler
-
Çalıkoğlu D. ve ÇOLAK
İ., (1988) "Rotoru sargılı asenkron motorlarda yarıiletken
kullanarak hızın kontrol edilmesi", Teknik Eğitim Fakültesi
Dergisi, sayfa. 39-47, Aralık.
-
Bal G. ve ÇOLAK
İ., (1995), "Sabit kondasatör - tristör kontrollu reaktör tipi
reaktif güç kompansatörü”, Gazi Üniversitesi Fen Bilimleri Enstitüsü
Dergisi, sayfa 9-15, Cilt 8, No. 2, Haziran.
-
ÇOLAK İ. and Bayındır R., (2001), “Modelling
and simulation of power transmission and distribution lines”,
Journal of Polytechnic, Vol. 4, No. 4, pp. 103-107, December.
-
ÇOLAK İ. ve Irmak, E., (2003), "Bilgisayar
kontrollu bina güvenlik sisteminin tasarımı ve uygulaması",
G.Ü. Fen Bilimleri Dergisi, Cilt 16 No. 2, Page 411-421 .
-
ÇOLAK İ. and BAYINDIR R., (2003), “Güç
katsayısının bir mikrodenetleyici kullanarak ölçümü”, Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Vol. 19,
No. 1-2, Pages 50-58, June-December.
-
ÇOLAK İ., Bayındır R., (2005), “DA Motoru Hız
Kontrolü İçin Denetleyiciyi PI Kontrolör Olarak Programlama”,
Pamukkale Üniversitesi Mühendislik Fakültesi, Mühendislik Bilimleri
Dergisi, Cilt 11, Sayı 2.
-
ÇOLAK İ., Bayındır R., (2005), “Klasik
Yolverme Metotlarının Denetleyici Yardımıyla Gerçekleştirilmesi”,
Firat Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt 17, Sayı 1,
sayfa 10-18.
-
ÇOLAK İ.,
Koşalay İ., ve Sefa
İ.,
(2005), "Yüksek
gerilimli güç sistemlerinde elektromangnetik uyumluluk problemi yaratan
temel kaynakların incelenmesi",
G.Ü. Fen Bilimleri Dergisi, Cilt 18, Sayı 3, Sayfa 397-407.
9.
ÇOLAK İ.,
Demirbaş
Ş., ve
Irmak E.,
(2006), "Asenkron
Motor Benzetimi İçin WEB Tabanlı Bir Eğitim Aracı",
Politeknik Dergisi, Cilt 9, Sayı 4, Sayfa 233-239.
10.Bayındır
R., Bektaş A. ve ÇOLAK İ.,
(2007), "Asenkron
Motorların Korunmasına Yönelik PLC Tabanlı Uygulama",
Politeknik Dergisi, Cilt 10, Sayı 2, Sayfa 117-121.
11 .Bayındır R., Sağıroğlu Ş.
ve ÇOLAK İ.,
(2007), "Yapay
Sinir Ağları Tabanlı Reaktif Güç Kompanzasyonu",
Politeknik Dergisi, Cilt 10, Sayı 2, Sayfa 129-135.
1 2.ÇOLAK İ.,
Soysal M., Irmak E. ve
Bayındır R., (2007), "Doğru
Akım Motorunun Dört Bölge Denetiminin Eğitim Amaçlı Gerçekleştirilmesi",
Politeknik Dergisi, Cilt 10, Sayı 3, Sayfa 219-227.
1 3.ÇOLAK İ.,
Bayındır R.
ve Kuruşcu S., (2007), "PLC
Kontrollü Asansör Eğitim Seti Tasarımı ve Uygulaması",
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi,
Cilt 23, Sayı 1-2, Sayfa 86-94.
1 4.ÇOLAK İ.,
Bayındır R.
Demirbaş Ş. ve Bektaş A., (2008),
"Bir
Endüstriyel İletmede Enerjinin İzlenmesi",
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi,
Cilt 24, Sayı 1-2, Sayfa 154-164.
15.ÇOLAK İ.
ve Kosalay İ., (2008),
"Elektrik
Tesislerinde Yıldırımın Etkilerinin Elektromanyetik Uyumluluk Açısından
İncelenmesi",
TÜBAV
Bilim,
Vol. 1, No.1, pp. 7-12.
16.ÇOLAK İ.
ve Kabalci E., (2009),
"Çok
Seviyeli Eviricilerin Kontrol Yöntemleri",
TÜBAV
Bilim,
Vol. 1, No.2, pp. 45-54.
17.ÇOLAK
İ. ve Demirtas M., (2008), " Rüzgâr
Enerjisinden Elektrik Üretiminin Türkiye'deki Gelişimi",
TÜBAV
Bilim,
Vol. 1, No.2, pp. 64-72.
18.Sağıroğlu
Ş.,
ÇOLAK
İ. Bayındır R. and Özbilen A., (2009), "Dağıtık
Denetim Sistemlerine Yönelik Elektronik Tehditler",
TÜBAV
Bilim,
Vol. 1, No.2, pp. 82-88.
19.ÇOLAK
İ. Bayındır R. and Demirtas M., (2009), "Türkiye'nin
Enerji Geleceği",
TÜBAV
Bilim,
Vol. 1, No.2, pp. 36-44.
7. Yapılan Atıflar:
Atıf
Yapan:
1. Hamid M.B. Metwally, (2001) "Loadless full load temperature rise test for
three phase induction motors", Energy Conversion and
Management, Vol. 42, pp. 519-528.
Atıf
Yapılan Yayınlar:
[1] ÇOLAK
İ., Garvey SD, Wright MT., (1993), “Mixed-frequency testing of
induction machines using inverters”, Fifth European Conference on Power
Electronics and Applications, vol. 5, pp. 317-322.
[2] Garvey SD,
ÇOLAK İ., Wright
MT, (1994), “Aspects of mixed
frequency testing of induction machines”, ICEM’94 International Conference
on Electrical Machines. Paris,
France, pp.
623-628.
[3]
Garvey SD., ÇOLAK İ. and Wright M.T., (1995),
"Variable inertia test for full-load temperature
rise testing of induction machines", IEE
Proc.-Electr. Power Appl., Vol. 142, No. 3, pp. 222-224, May.
Atıf
Yapan:
7. Atıflar
|
